GN 1426 telescopic slides are installed in pairs. The special design allows the stroke to achieve ≈ 100 % of the nominal length l1 on both sides (double-sided full extension). Applications such as the double-sided loading of a drawer can be realized in this way. The rubber stops dampen the impact of the slide in the extended end position. If larger static or dynamic loads occur in the direction of extension, they should be absorbed by additional end stops.
The telescopic slides are delivered in pairs. They can be installed on either the left or right side due to the design. All mounting holes are easy to reach through auxiliary holes. Only the mounting holes are shown, but other production-related holes may be present.
Slide profile
Steel, Zinc plated, blue passivated finishZB
Balls
Rolling bearing steel, hardened
Ball cage
Steel, zinc plated
Rubber stop
Plastic / Elastomer
Operating temperature -4 °F to +212 °F
(-20 °C to +100 °C)
RoHS
Other lengths and hole distances
Other mounting options
Other finishes
With support bracket
| B | With rubber stop |
| 2 | Mounting with countersunk holes |
| l1 | l2 +0.16 / -0.16 Stroke | l3 | Fs per pair at 10,000 cycles | at 100,000 cycles |
|---|---|---|---|---|
| 19.69 | 19.80 | 38.92 | 256 lbf (1140 N) | 171 lbf (760 N) |
| 23.62 | 23.90 | 46.95 | 268 lbf (1190 N) | 178 lbf (790 N) |
| 27.56 | 27.99 | 54.98 | 294 lbf (1310 N) | 196 lbf (870 N) |
| 31.50 | 32.09 | 63.01 | 310 lbf (1380 N) | 207 lbf (920 N) |
|
|||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||
|
For the listed loading forces FS to be absorbed reliably in the surrounding structure, all available countersunk holes of the outer and inner slide must be used. Failure to use mounting screws reduces the specified load capacity accordingly. The following screws can be used for mounting: |
|||||||||||
|
Designation - Standard |
Outer Slide |
Inner Slide |
|||||||||
|
The maximum load capacity of telescopic slides depends on the slide cross-section and the nominal length l1 as well as the resulting stroke l2. Furthermore, the extension width, the slide materials used and the components of the equipment options, such as the dampened self-retracting mechanism, have a corresponding influence. |
|||||||||||
|
|
||||||||||
|
Wear, performance, and maximum bending were assessed after each test section. |
|||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 4 | Can$268.37 |
| 5 | 9 | Can$246.01 |
| 10 | 24 | Can$223.65 |
| ≥ 25 | Can$201.28 |
Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993
