Cart

The cart is empty.

Canada
Country
USA EN
Mexico EN  |  ES
Canada EN  |  FR
Country English English Español English Français
Show all
You are here: Product Overview  >  3.5 Controlling, Venting, Sealing of Liquids and Gases  >  Threaded Plugs

Threaded Plugs | Fluid Fill Plugs

Threaded plugs and sealing plugs offer control over filling and draining containers, supply tanks, and gearboxes by sealing the openings.

Filter Products
New Products
System of Measurement
Material
Thread (from - to) Thread
Temperature resistance

Remove filters
EN 745 Plastic Threaded Plugs, with Flat Seal Identification no.: 1 - Without vent hole EN 745 Plastic Threaded Plugs, with Flat Seal Identification no.: 2 - With vent hole
EN 745 Plastic Threaded Plugs, with Flat Seal
EN 745.2 Plastic Threaded Plugs, with O-Ring Identification no.: 1 - Without vent hole EN 745.2 Plastic Threaded Plugs, with O-Ring Identification no.: 2 - With vent hole
EN 745.2 Plastic Threaded Plugs, with O-Ring
EN 745.1 Aluminum Label Disks without Symbol, for Threaded Plugs EN 745 / EN 745.2
EN 745.1 Aluminum Label Disks without Symbol, for Threaded Plugs EN 745 / EN 745.2
EN 747.1 Aluminum Label Disks with Fill Symbol, for Threaded Plugs EN 745 / EN 745.2
EN 747.1 Aluminum Label Disks with Fill Symbol, for Threaded Plugs EN 745 / EN 745.2
EN 740.1 Aluminum Label Disks with Drain Symbol, for Threaded Plugs EN 745 / EN 745.2
EN 740.1 Aluminum Label Disks with Drain Symbol, for Threaded Plugs EN 745 / EN 745.2
EN 745.6 Plastic Threaded Plugs, ATEX Explosion Protective
EN 745.6 Plastic Threaded Plugs, ATEX Explosion Protective
EN 740 Plastic Fluid Drain Plugs, Red, with Exposed Seal
EN 740 Plastic Fluid Drain Plugs, Red, with Exposed Seal
EN 740.2 Plastic Fluid Drain Plugs, Red, with Recessed O-Ring
EN 740.2 Plastic Fluid Drain Plugs, Red, with Recessed O-Ring
EN 747 Plastic Fluid Fill Plugs, with or without Dipstick, with Exposed Seal Type: A - Without dipstick<br />Identification no.: 1 - Without vent hole EN 747 Plastic Fluid Fill Plugs, with or without Dipstick, with Exposed Seal Type: A - Without dipstick<br />Identification no.: 2 - With vent hole EN 747 Plastic Fluid Fill Plugs, with or without Dipstick, with Exposed Seal Type: B - With dipstick<br />Identification no.: 1 - Without vent hole EN 747 Plastic Fluid Fill Plugs, with or without Dipstick, with Exposed Seal Type: B - With dipstick<br />Identification no.: 2 - With vent hole
EN 747 Plastic Fluid Fill Plugs, with or without Dipstick, with Exposed Seal
EN 747.2 Plastic Fluid Fill Plugs, with Recessed O-Ring Identification no.: 1 - Without vent hole EN 747.2 Plastic Fluid Fill Plugs, with Recessed O-Ring Identification no.: 2 - With vent hole
EN 747.2 Plastic Fluid Fill Plugs, with Recessed O-Ring
TO Plastic Fluid Fill / Drain Plugs, with or without Symbol Type: M - With drain symbol<br />Identification no.: 1 - Without vent hole TO Plastic Fluid Fill / Drain Plugs, with or without Symbol Type: J - Without symbol<br />Identification no.: 1 - Without vent hole TO Plastic Fluid Fill / Drain Plugs, with or without Symbol Type: J - Without symbol<br />Identification no.: 2 - With vent hole TO Plastic Fluid Fill / Drain Plugs, with or without Symbol Type: L - With fill symbol<br />Identification no.: 1 - Without vent hole TO Plastic Fluid Fill / Drain Plugs, with or without Symbol Type: L - With fill symbol<br />Identification no.: 2 - With vent hole
TO Plastic Fluid Fill / Drain Plugs, with or without Symbol
TAO Plastic Fluid Plugs, with Dipstick, without Symbol
TAO Plastic Fluid Plugs, with Dipstick, without Symbol
TCA Plastic Fluid Plugs, with Dipstick, with Fluid Symbol
TCA Plastic Fluid Plugs, with Dipstick, with Fluid Symbol
GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F Type: AS - With drain symbol, plain finish<br />Identification no.: 1 - Without vent hole GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F Type: AS - With drain symbol, plain finish<br />Identification no.: 2 - With vent hole GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F Type: ES - With fill symbol, plain finish<br />Identification no.: 1 - Without vent hole GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F Type: ES - With fill symbol, plain finish<br />Identification no.: 2 - With vent hole GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F Type: OS - Without symbol, plain finish<br />Identification no.: 1 - Without vent hole GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F Type: OS - Without symbol, plain finish<br />Identification no.: 2 - With vent hole
GN 741 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 212 °F
GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: OS - Without symbol, plain finish<br />Identification no.: 1 - Without vent hole GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: AS - With drain symbol, plain finish<br />Identification no.: 1 - Without vent hole GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: ASS - With drain symbol, black anodized finish<br />Identification no.: 1 - Without vent hole GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: ES - With fill symbol, plain finish<br />Identification no.: 1 - Without vent hole GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: ESS - With fill symbol, black anodized finish<br />Identification no.: 1 - Without vent hole GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: OSS - Without symbol, black anodized finish<br />Identification no.: 1 - Without vent hole
GN 742 Aluminum Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F
GN 742.5 Stainless Steel AISI 316L Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: A - With drain symbol GN 742.5 Stainless Steel AISI 316L Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: E - With fill symbol GN 742.5 Stainless Steel AISI 316L Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F Type: O - Without symbol
GN 742.5 Stainless Steel AISI 316L Fluid Fill / Drain Plugs, with or without Symbol, Resistant up to 356 °F
GN 738 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 212 °F, Plain Finish
GN 738 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 212 °F, Plain Finish
GN 738 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 212 °F, Black Anodized Finish
GN 738 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 212 °F, Black Anodized Finish
GN 738.1 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 356 °F, Plain Finish
GN 738.1 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 356 °F, Plain Finish
GN 738.1 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 356 °F, Black Anodized Finish
GN 738.1 Aluminum Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 356 °F, Black Anodized Finish
GN 738.5 Stainless Steel Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 356 °F, Plain Finish
GN 738.5 Stainless Steel Magnetic Threaded Plugs, Magnet Material AINiCo, Resistant up to 356 °F, Plain Finish
GN 749 Steel Threaded Plugs Type: A - NBR rubber seal (Perbunan<sup>®</sup>) GN 749 Steel Threaded Plugs Type: B - FPM rubber seal (Viton<sup>®</sup>)
GN 749 Steel Threaded Plugs
DIN 906 Steel Threaded Plugs, with Tapered Thread Material: ST - Steel<br />Type: A - Without thread coating DIN 906 Steel Threaded Plugs, with Tapered Thread Material: ST - Steel<br />Type: GPC - With thread coating
DIN 906 Steel Threaded Plugs, with Tapered Thread
DIN 906 Stainless Steel Threaded Plugs, with Tapered Thread Material: NI - Stainless steel<br />Type: A - Without thread coating DIN 906 Stainless Steel Threaded Plugs, with Tapered Thread Material: A4 - Stainless steel<br />Type: A - Without thread coating DIN 906 Stainless Steel Threaded Plugs, with Tapered Thread Material: A4 - Stainless steel<br />Type: GPC - With thread coating DIN 906 Stainless Steel Threaded Plugs, with Tapered Thread Material: NI - Stainless steel<br />Type: GPC - With thread coating
DIN 906 Stainless Steel Threaded Plugs, with Tapered Thread
DIN 908 Steel Threaded Plugs Type: AA - With aluminum sealing washer DIN 908 Steel Threaded Plugs Type: A - Without sealing washer DIN 908 Steel Threaded Plugs Type: AC - With copper sealing washer
DIN 908 Steel Threaded Plugs
DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: ST - Steel<br />Type: AC - With copper sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: A4 - Stainless steel<br />Type: A - Without sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: A4 - Stainless steel<br />Type: AA - With aluminum sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: A4 - Stainless steel<br />Type: AC - With copper sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: A4 - Stainless steel<br />Type: AN - With stainless steel sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: ST - Steel<br />Type: A - Without sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: ST - Steel<br />Type: AA - With aluminum sealing ring DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex Material: ST - Steel<br />Type: AN - With stainless steel sealing ring
NEW DIN 910 Steel / Stainless Steel Threaded Plugs, with Collar and External Hex
EN 746 Plastic Threaded Plugs
EN 746 Plastic Threaded Plugs
GN 441 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 212 °F Identification no.: 1 - Without vent hole<br />Color: BL - Plain, tumbled finish GN 441 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 212 °F Identification no.: 1 - Without vent hole<br />Color: SW - Black, RAL 9005, textured finish GN 441 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 212 °F Identification no.: 2 - With vent hole<br />Color: BL - Plain, tumbled finish GN 441 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 212 °F Identification no.: 2 - With vent hole<br />Color: SW - Black, RAL 9005, textured finish
GN 441 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 212 °F
GN 442 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 392 °F Identification no.: 1 - Without vent hole<br />Color: BL - Plain, tumbled finish GN 442 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 392 °F Identification no.: 1 - Without vent hole<br />Color: SW - Black, RAL 9005, textured finish GN 442 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 392 °F Identification no.: 2 - With vent hole<br />Color: BL - Plain, tumbled finish GN 442 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 392 °F Identification no.: 2 - With vent hole<br />Color: SW - Black, RAL 9005, textured finish
GN 442 Aluminum Threaded Plugs, with Finger Grip, Resistant up to 392 °F
EN 548.2 Plastic Fluid Retention Caps
EN 548.2 Plastic Fluid Retention Caps
EN 548.1 Plastic Fluid Fill Plugs, with or without Dipstick Type: B - With dipstick EN 548.1 Plastic Fluid Fill Plugs, with or without Dipstick Type: A - Without dipstick
EN 548.1 Plastic Fluid Fill Plugs, with or without Dipstick
EN 556 Plastic Filler Breather, with Open / Closed Position
EN 556 Plastic Filler Breather, with Open / Closed Position
EN 748 Plastic Fluid Fill Plugs, with or without Dipstick, Push-Fit Type Type: A - Without dipstick<br />Identification no.: 1 - Without vent hole EN 748 Plastic Fluid Fill Plugs, with or without Dipstick, Push-Fit Type Type: A - Without dipstick<br />Identification no.: 2 - With vent hole EN 748 Plastic Fluid Fill Plugs, with or without Dipstick, Push-Fit Type Type: B - With dipstick<br />Identification no.: 1 - Without vent hole EN 748 Plastic Fluid Fill Plugs, with or without Dipstick, Push-Fit Type Type: B - With dipstick<br />Identification no.: 2 - With vent hole
EN 748 Plastic Fluid Fill Plugs, with or without Dipstick, Push-Fit Type
Click below for Custom Solutions. Special requests
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

+1-800-397-6993 sales@jwwinco.ca
Request Callback
 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
J.W. Winco, Inc.
Go to
www.jwwinco.com
An error has occurred!
We have received your callback request and will contact you soon.