Universal Joints with Friction Bearing DIN 808

Product description

Information

Universal joints with friction bearings DIN 808 are known for their precision. They have minimal play and are long lasting.

The permissible RPM of these joints is largely dependent on the type of application, including load, duration, inclination angle and lubrication. For RPM over 1000, universal joints with needle bearing should be used.

For continuous use ample lubrication is essential. This can be achieved by fitting the joint with a grease filled GN 808.1 cover boot.

The “How to order” example refers to universal joints with equal bores d₂ or s at both ends.

Specification

Body
Steel, plain finish

Joint bearing surfaces / pins / bearing sleeves
Case-hardened

RoHS

On request

Inch size bores
Other or unequal bores

Build & Price

Part Number	d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

6MXB0	0.63	6 +0.001	-	1.34	-	0.67	-	0.31 +0.04
6KXB0	0.63	6 +0.001	-	1.34	-	0.67	-	0.31 +0.04
808-16-V6-34-EG	0.63	-	V 6	1.34	-	0.67	-	0.31 +0.04
6MXC0	0.63	6 +0.001	-	-	2.20	0.67	0.87	0.31 +0.04
6KXC0	0.63	6 +0.001	-	-	2.20	0.67	0.87	0.31 +0.04
808-16-V6-56-DG	0.63	-	V 6	-	2.20	0.67	0.87	0.31 +0.04
8MXB0	0.63	8 +0.001	-	1.57	-	0.79	-	0.43 +0.04
8KXB0	0.63	8 +0.001	-	1.57	-	0.79	-	0.43 +0.04
808-16-V8-40-EG	0.63	-	V 8	1.57	-	0.79	-	0.43 +0.04
8MXC0	0.63	8 +0.001	-	-	2.44	0.79	0.87	0.43 +0.04
8KXC0	0.63	8 +0.001	-	-	2.44	0.79	0.87	0.43 +0.04
808-16-V8-62-DG	0.63	-	V 8	-	2.44	0.79	0.87	0.43 +0.04
10MXB0	0.63	10 +0.001	-	2.05	-	1.02	-	0.55 +0.04
10KXB0	0.63	10 +0.001	-	2.05	-	1.02	-	0.55 +0.04
808-16-V8-52-EG	0.63	-	V 8	2.05	-	1.02	-	0.55 +0.04
10MXC0	0.63	10 +0.001	-	-	2.91	1.02	0.87	0.55 +0.04
10KXC0	0.63	10 +0.001	-	-	2.91	1.02	0.87	0.55 +0.04
808-16-V8-74-DG	0.63	-	V 8	-	2.91	1.02	0.87	0.55 +0.04
10MXB1	0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
10KXB1	0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
808-22-V10-48-EG	0.87	-	V 10	1.89	-	0.94	-	0.47 +0.04
10MXC1	0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
10KXC1	0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
808-22-V10-74-DG	0.87	-	V 10	-	2.91	0.94	1.02	0.47 +0.04
12MXB1	0.87	12 +0.001	-	2.44	-	1.22	-	0.71 +0.04
12KXB1	0.87	12 +0.001	-	2.44	-	1.22	-	0.71 +0.04
808-22-V10-62-EG	0.87	-	V 10	2.44	-	1.22	-	0.71 +0.04
12MXC1	0.87	12 +0.001	-	-	3.46	1.22	1.02	0.71 +0.04
12KXC1	0.87	12 +0.001	-	-	3.46	1.22	1.02	0.71 +0.04
808-22-V10-88-DG	0.87	-	V 10	-	3.46	1.22	1.02	0.71 +0.04
12MXB2	0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
12KXB2	0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
808-25-V12-56-EG	0.98	-	V 12	2.20	-	1.10	-	0.51 +0.04
12MXC2	0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
12KXC2	0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
808-25-V12-86-DG	0.98	-	V 12	-	3.39	1.10	1.18	0.51 +0.04
16MXB2	0.98	16 +0.001	-	2.91	-	1.46	-	0.83 +0.04
16KXB2	0.98	16 +0.001	-	2.91	-	1.46	-	0.83 +0.04
808-25-V12-74-EG	0.98	-	V 12	2.91	-	1.46	-	0.83 +0.04
16MXC2	0.98	16 +0.001	-	-	4.09	1.46	1.18	0.83 +0.04
16KXC2	0.98	16 +0.001	-	-	4.09	1.46	1.18	0.83 +0.04
808-25-V12-104-DG	0.98	-	V 12	-	4.09	1.46	1.18	0.83 +0.04
14MXB3	1.10	14 +0.001	-	2.36	-	1.18	-	0.51 +0.04
14KXB3	1.10	14 +0.001	-	2.36	-	1.18	-	0.51 +0.04
808-28-V14-60-EG	1.10	-	V 14	2.36	-	1.18	-	0.51 +0.04
14MXC3	1.10	14 +0.001	-	-	3.78	1.18	1.42	0.51 +0.04
14KXC3	1.10	14 +0.001	-	-	3.78	1.18	1.42	0.51 +0.04
808-28-V14-96-DG	1.10	-	V 14	-	3.78	1.18	1.42	0.51 +0.04
16MXB4	1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
16KXB4	1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
808-32-V16-68-EG	1.26	-	V 16	2.68	-	1.34	-	0.63 +0.04
16MXC4	1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
16KXC4	1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
808-32-V16-105-DG	1.26	-	V 16	-	4.13	1.34	1.46	0.63 +0.04
20MXB4	1.26	20 +0.001	-	3.39	-	1.69	-	0.94 +0.04
20KXB4	1.26	20 +0.001	-	3.39	-	1.69	-	0.94 +0.04
808-32-V16-86-EG	1.26	-	V 16	3.39	-	1.69	-	0.94 +0.04
20MXC4	1.26	20 +0.001	-	-	4.88	1.69	1.50	0.94 +0.04
20KXC4	1.26	20 +0.001	-	-	4.88	1.69	1.50	0.94 +0.04
808-32-V16-124-DG	1.26	-	V 16	-	4.88	1.69	1.50	0.94 +0.04
18MXB5	1.42	18 +0.001	-	2.91	-	1.46	-	0.67 +0.04
18KXB5	1.42	18 +0.001	-	2.91	-	1.46	-	0.67 +0.04
808-36-V18-74-EG	1.42	-	V 18	2.91	-	1.46	-	0.67 +0.04
18MXC5	1.42	18 +0.001	-	-	4.49	1.46	1.57	0.67 +0.04
18KXC5	1.42	18 +0.001	-	-	4.49	1.46	1.57	0.67 +0.04
808-36-V18-114-DG	1.42	-	V 18	-	4.49	1.46	1.57	0.67 +0.04
20MXB6	1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
20KXB6	1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
808-42-V20-82-EG	1.65	-	V 20	3.23	-	1.61	-	0.71 +0.04
20MXC6	1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
20KXC6	1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
808-42-V20-128-DG	1.65	-	V 20	-	5.04	1.61	1.81	0.71 +0.04
25MXB6	1.65	25 +0.001	-	4.25	-	2.13	-	1.22 +0.04
25KXB6	1.65	25 +0.001	-	4.25	-	2.13	-	1.22 +0.04
808-42-V20-108-EG	1.65	-	V 20	4.25	-	2.13	-	1.22 +0.04
25MXC6	1.65	25 +0.001	-	-	6.14	2.13	1.89	1.22 +0.04
25KXC6	1.65	25 +0.001	-	-	6.14	2.13	1.89	1.22 +0.04
808-42-V20-156-DG	1.65	-	V 20	-	6.14	2.13	1.89	1.22 +0.04
22MXB7	1.77	22 +0.001	-	3.74	-	1.87	-	0.87 +0.04
22KXB7	1.77	22 +0.001	-	3.74	-	1.87	-	0.87 +0.04
808-45-V22-95-EG	1.77	-	V 22	3.74	-	1.87	-	0.87 +0.04
22MXC7	1.77	22 +0.001	-	-	5.71	1.87	1.97	0.87 +0.04
22KXC7	1.77	22 +0.001	-	-	5.71	1.87	1.97	0.87 +0.04
808-45-V22-145-DG	1.77	-	V 22	-	5.71	1.87	1.97	0.87 +0.04
25MXB8	1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
25KXB8	1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
808-50-V25-108-EG	1.97	-	V 25	4.25	-	2.13	-	1.02 +0.04
25MXC8	1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
25KXC8	1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
808-50-V25-163-DG	1.97	-	V 25	-	6.42	2.13	2.17	1.02 +0.04
30MXB8	1.97	30 +0.001	-	5.20	-	2.60	-	1.50 +0.04
30KXB8	1.97	30 +0.001	-	5.20	-	2.60	-	1.50 +0.04
808-50-V25-132-EG	1.97	-	V 25	5.20	-	2.60	-	1.50 +0.04
30MXC8	1.97	30 +0.001	-	-	7.40	2.60	2.20	1.50 +0.04
30KXC8	1.97	30 +0.001	-	-	7.40	2.60	2.20	1.50 +0.04
808-50-V25-188-DG	1.97	-	V 25	-	7.40	2.60	2.20	1.50 +0.04
30MXB9	2.28	30 +0.001	-	4.80	-	2.40	-	1.14 +0.04
30KXB9	2.28	30 +0.001	-	4.80	-	2.40	-	1.14 +0.04
808-58-V30-122-EG	2.28	-	V 30	4.80	-	2.40	-	1.14 +0.04
30MXC9	2.28	30 +0.001	-	-	7.48	2.40	2.68	1.14 +0.04
30KXC9	2.28	30 +0.001	-	-	7.48	2.40	2.68	1.14 +0.04
808-58-V30-190-DG	2.28	-	V 30	-	7.48	2.40	2.68	1.14 +0.04
32MXB9	2.28	32 +0.001	-	5.12	-	2.56	-	1.30 +0.04
32KXB9	2.28	32 +0.001	-	5.12	-	2.56	-	1.30 +0.04
808-58-V30-130-EG	2.28	-	V 30	5.12	-	2.56	-	1.30 +0.04
32MXC9	2.28	32 +0.001	-	-	7.80	2.56	2.68	1.30 +0.04
32KXC9	2.28	32 +0.001	-	-	7.80	2.56	2.68	1.30 +0.04
808-58-V30-198-DG	2.28	-	V 30	-	7.80	2.56	2.68	1.30 +0.04
808-70-V35-140-EG	2.76	-	V 35	5.51	-	2.76	-	1.38 +0.04
808-70-V35-212-DG	2.76	-	V 35	-	8.35	2.76	2.83	1.38 +0.04

d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

0.63	6	V 6*	1.34	2.20	0.67	0.87	0.31
0.63	8	V 8*	1.57	2.44	0.79	0.87	0.43
0.63	10	V 8*	2.05	2.91	1.02	0.87	0.55
0.87	10	V 10*	1.89	2.91	0.94	1.02	0.47
0.87	12	V 10*	2.44	3.46	1.22	1.02	0.71
0.98	12	V 12*	2.20	3.39	1.10	1.18	0.51
0.98	16	V 12*	2.91	4.09	1.46	1.18	0.83
1.10	14	V 14*	2.36	3.78	1.18	1.42	0.51
1.26	16	V 16*	2.68	4.13	1.34	1.46	0.63
1.26	20	V 16*	3.39	4.88	1.69	1.50	0.94
1.42	18	V 18*	2.91	4.49	1.46	1.57	0.67
1.65	20	V 20*	3.23	5.04	1.61	1.81	0.71
1.65	25	V 20*	4.25	6.14	2.13	1.89	1.22
1.77	22	V 22*	3.74	5.71	1.87	1.97	0.87
1.97	25	V 25*	4.25	6.42	2.13	2.17	1.02
1.97	30	V 25*	5.20	7.40	2.60	2.20	1.50
2.28	30	V 30*	4.80	7.48	2.40	2.68	1.14
2.28	32	V 30*	5.12	7.80	2.56	2.68	1.30
2.76*	35	V 35	5.51	8.35	2.76	2.83	1.38

3D Product Configurator

GN 110.1 Cross Holes (Special Order)

Show / Hide columns

d₁ H7 s H11	d₁ H7 s H11	d₂ H11 K / B	d₂ H11 B	d₃	Length l K / V	Length l B

6	-	2	2	M 3	4	4
8	-	3	3	M 5	5.5	5.5
10	-	3	4	M 5	5.5	6
12	14	4	5	M 6	6.5	7
16	18	5	6	M 6	8	9
20	-	5	8	M 6	8	10
22	-	6	8	M 6	10	10
25	-	6	10	M 8	10	14
30	32	6	12	M 8	14	16
35	-	6	12	M 8	16	16

Cross holes in universal joint shafts and in universal shafts are suitable for making shaft-hub connections using a pin or a grub screw. For bores with keyway or square, they serve to secure the axial position of the universal joint and shaft. The d₂ pin hole with H11 tolerance is intended for use with spiral spring pins.
The position of the cross holes / cross threads in relation to the keyway / square or the universal joints is shown in the overview.
To order cross hole GN 110.1, please call our sales team:

USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total Canadian Dollars (net)

Can$84.92

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$84.92
50	99	Can$77.84
100	249	Can$70.77
≥ 250		Can$63.69

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.132 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.