Universal Joints with Friction Bearing DIN 808

DIN 808 Stainless Steel Universal Joints with Friction Bearing, Single or Double Jointed Material: NI - Stainless steel
Bore code: B - Without keyway
Type: DG - Double jointed, friction bearing

Material: NI - Stainless steel
Bore code: B - Without keyway
Type: DG - Double jointed, friction bearing

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet DIN 808 Print This Page Mounting Information Permissible RPM and Torques / Determining the Size Keyways WN / DIN 6885 Cross Holes GN 110.1 ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Since the moveable parts of universal joints with friction bearings DIN 808 are not surface treated, i.e. not case-hardened, the possible applications are much more limited compared to the ones made of steel. Therefore, the guidelines for the selection of universal joints with friction bearing may be applied at a limited extent only. RPM over 200 may become critical.

For stainless steel universal joints, ample lubrication is especially important. This can be achieved by fitting the joint with a grease filled GN 808.1 cover boot.

The “How to order” example refers to universal joints with equal bores d₂ or s at both ends.

Specification

Body
Stainless steelNI AISI 304

RoHS

On request

Other or unequal bores

Part Number B - Without keyway	Part Number K - With keyway	Part Number V - With square	d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

808-16-B6-34-EG-NI	808-16-K6-34-EG-NI		0.63	6 +0.001	-	1.34	-	0.67	-	0.31 +0.04
		808-16-V6-34-EG-NI	0.63	-	V 6	1.34	-	0.67	-	0.31 +0.04
808-16-B8-40-EG-NI	808-16-K8-40-EG-NI		0.63	8 +0.001	-	1.57	-	0.79	-	0.43 +0.04
		808-16-V8-40-EG-NI	0.63	-	V 8	1.57	-	0.79	-	0.43 +0.04
808-22-B10-48-EG-NI	808-22-K10-48-EG-NI		0.87	10 +0.001	-	1.89	-	0.94	-	0.47 +0.04
		808-22-V10-48-EG-NI	0.87	-	V 10	1.89	-	0.94	-	0.47 +0.04
808-25-B12-56-EG-NI	808-25-K12-56-EG-NI		0.98	12 +0.001	-	2.20	-	1.10	-	0.51 +0.04
		808-25-V12-56-EG-NI	0.98	-	V 12	2.20	-	1.10	-	0.51 +0.04
808-32-B16-68-EG-NI	808-32-K16-68-EG-NI		1.26	16 +0.001	-	2.68	-	1.34	-	0.63 +0.04
		808-32-V16-68-EG-NI	1.26	-	V 16	2.68	-	1.34	-	0.63 +0.04
808-42-B20-82-EG-NI	808-42-K20-82-EG-NI		1.65	20 +0.001	-	3.23	-	1.61	-	0.71 +0.04
		808-42-V20-82-EG-NI	1.65	-	V 20	3.23	-	1.61	-	0.71 +0.04
808-50-B25-108-EG-NI	808-50-K25-108-EG-NI		1.97	25 +0.001	-	4.25	-	2.13	-	1.02 +0.04
		808-50-V25-108-EG-NI	1.97	-	V 25	4.25	-	2.13	-	1.02 +0.04

Part Number B - Without keyway	Part Number K - With keyway	Part Number V - With square	d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

808-16-B6-56-DG-NI	808-16-K6-56-DG-NI		0.63	6 +0.001	-	-	2.20	0.67	0.87	0.31 +0.04
		808-16-V6-56-DG-NI	0.63	-	V 6	-	2.20	0.67	0.87	0.31 +0.04
808-16-B8-62-DG-NI	808-16-K8-62-DG-NI		0.63	8 +0.001	-	-	2.44	0.79	0.87	0.43 +0.04
		808-16-V8-62-DG-NI	0.63	-	V 8	-	2.44	0.79	0.87	0.43 +0.04
808-22-B10-74-DG-NI	808-22-K10-74-DG-NI		0.87	10 +0.001	-	-	2.91	0.94	1.02	0.47 +0.04
		808-22-V10-74-DG-NI	0.87	-	V 10	-	2.91	0.94	1.02	0.47 +0.04
808-25-B12-86-DG-NI	808-25-K12-86-DG-NI		0.98	12 +0.001	-	-	3.39	1.10	1.18	0.51 +0.04
		808-25-V12-86-DG-NI	0.98	-	V 12	-	3.39	1.10	1.18	0.51 +0.04
808-32-B16-105-DG-NI	808-32-K16-105-DG-NI		1.26	16 +0.001	-	-	4.13	1.34	1.46	0.63 +0.04
		808-32-V16-105-DG-NI	1.26	-	V 16	-	4.13	1.34	1.46	0.63 +0.04
808-42-B20-128-DG-NI	808-42-K20-128-DG-NI		1.65	20 +0.001	-	-	5.04	1.61	1.81	0.71 +0.04
		808-42-V20-128-DG-NI	1.65	-	V 20	-	5.04	1.61	1.81	0.71 +0.04
808-50-B25-163-DG-NI	808-50-K25-163-DG-NI		1.97	25 +0.001	-	-	6.42	2.13	2.17	1.02 +0.04
		808-50-V25-163-DG-NI	1.97	-	V 25	-	6.42	2.13	2.17	1.02 +0.04

d₁	d₂ +0.001 Bore	s Square	l₁ Type EG	l₂ Type DG	l₃	l₄	t +0.04 Max. assembly length of the shaft

0.63	6	V 6*	1.34	2.20	0.67	0.87	0.31
0.63	8	V 8*	1.57	2.44	0.79	0.87	0.43
0.87	10	V 10*	1.89	2.91	0.94	1.02	0.47
0.98	12	V 12*	2.20	3.39	1.10	1.18	0.51
1.26	16	V 16*	2.68	4.13	1.34	1.46	0.63
1.65	20	V 20*	3.23	5.04	1.61	1.81	0.71
1.97	25	V 25*	4.25	6.42	2.13	2.17	1.02

d₁

d₂ +0.001
Bore

s
Square

l₁
Type EG

l₂
Type DG

l₃

l₄

t +0.04
Max. assembly
length of the shaft

0.63

V 6*

1.34

2.20

0.67

0.87

0.31

0.63

V 8*

1.57

2.44

0.79

0.87

0.43

0.87

V 10*

1.89

2.91

0.94

1.02

0.47

0.98

V 12*

2.20

3.39

1.10

1.18

0.51

1.26

V 16*

2.68

4.13

1.34

1.46

0.63

1.65

V 20*

3.23

5.04

1.61

1.81

0.71

1.97

V 25*

4.25

6.42

2.13

2.17

1.02

d₁ H7
s H11

d₂ H11
K / B

d₂ H11
B

d₃

Length l
K / V

Length l
B

M 3

M 5

5.5

M 5

5.5

M 6

6.5

M 6

M 8

Selected Part

Part Number

Total (net)

Can$195.81

Available within 1-2 weeks

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$195.81
50	99	Can$179.49
100	249	Can$163.17
≥ 250		Can$146.86

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.132 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

DIN 808 Universal Joints with Friction Bearing Stainless Steel, Single or Double Jointed

Product Family Stainless Steel

Product description

Specification

On request

Part Options / Table

Bore code

Type

Type: EG - Single jointed, friction bearing

Type: DG - Double jointed, friction bearing

Metric

Build & Price

GN 110.1 Cross Holes (Special Order)

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

EG	Single jointed, friction bearing
DG	Double jointed, friction bearing

DIN 808 Universal Joints with Friction Bearing Stainless Steel, Single or Double Jointed

Product Family Stainless Steel

Product description

Specification

On request

Part Options / Table

Bore code

Type

Type: EG - Single jointed, friction bearing

Type: DG - Double jointed, friction bearing

Metric

Build & Price

GN 110.1 Cross Holes (Special Order)

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

Important: Price Adjustment Announcement