Spring Plungers GN 616

Product description

Information

Spring plungers GN 616 are used as locating devices, detent pins, pressure pins and ejectors. A typical example is push-on / push-off applications.

The slot on the nose pin side is provided for blind hole applications. A special installation tool GN 611.5 is available (see table).

Specification

Type S / SS

Steel housing, blackened finish
Steel nose pin, hardened
Operating temperature up to 482 °F (250 °C)

Type K

Steel housing, blackened finish
Plastic nose pin, polyacetal (POM)
Operating temperature
-22 °F to 122 °F (-30 °C to +50 °C)

Spring
Stainless steel AISI 631

Identification of Type SS
Housing with 2 longitudinal markings

RoHS

Accessory

Installation Tools GN 611.5 (Part no. See Table)

On request

With PFB / MVK thread locking

Build & Price

Part Number	d₁ Type S	Type SS	Type K	d₂	Length l +0.008	w Compression	Spring load ≈ Standard (Type S / K) Initial	End	High (Type SS) Initial	End	Part number installation tool

616-M3-S	M 3	-	-	0.04	0.472 +0.008	0.04	0.45 lbf (2 N)	0.90 lbf (4 N)	-	-	611.5-M3
616-M4-S	M 4	-	-	0.06	0.591 +0.008	0.06	1.01 lbf (4.5 N)	3.60 lbf (16 N)	-	-	611.5-M4
616-M5-S	M 5	-	-	0.09	0.709 +0.008	0.09	1.35 lbf (6 N)	4.27 lbf (19 N)	-	-	611.5-M5
616-M6-S	M 6	-	-	0.11	0.787 +0.008	0.10	1.35 lbf (6 N)	4.27 lbf (19 N)	-	-	611.5-M6
616-M8-S	M 8	-	-	0.14	0.866 +0.008	0.12	2.25 lbf (10 N)	8.77 lbf (39 N)	-	-	611.5-M8
616-M10-S	M 10	-	-	0.16	0.866 +0.008	0.12	2.25 lbf (10 N)	8.77 lbf (39 N)	-	-	611.5-M10
616-M12-S	M 12	-	-	0.24	1.102 +0.008	0.16	2.70 lbf (12 N)	11.91 lbf (53 N)	-	-	611.5-M12
616-M16-S	M 16	-	-	0.30	1.260 +0.008	0.20	10.12 lbf (45 N)	22.48 lbf (100 N)	-	-	611.5-M16
616-M20-S	M 20	-	-	0.39	1.575 +0.008	0.28	11.69 lbf (52 N)	28.10 lbf (125 N)	-	-	611.5-M20
616-M24-S	M 24	-	-	0.47	2.047 +0.008	0.39	15.74 lbf (70 N)	38.22 lbf (170 N)	-	-	611.5-M24

Part Number	d₁ Type S	Type SS	Type K	d₂	Length l +0.008	w Compression	Spring load ≈ Standard (Type S / K) Initial	End	High (Type SS) Initial	End	Part number installation tool

616-M4-K	-	-	M 4	0.06	0.591 +0.008	0.06	1.01 lbf (4.5 N)	3.60 lbf (16 N)	-	-	611.5-M4
616-M5-K	-	-	M 5	0.09	0.709 +0.008	0.09	1.35 lbf (6 N)	4.27 lbf (19 N)	-	-	611.5-M5
616-M6-K	-	-	M 6	0.11	0.787 +0.008	0.10	1.35 lbf (6 N)	4.27 lbf (19 N)	-	-	611.5-M6
616-M8-K	-	-	M 8	0.14	0.866 +0.008	0.12	2.25 lbf (10 N)	8.77 lbf (39 N)	-	-	611.5-M8
616-M10-K	-	-	M 10	0.16	0.866 +0.008	0.12	2.25 lbf (10 N)	8.77 lbf (39 N)	-	-	611.5-M10
616-M12-K	-	-	M 12	0.24	1.102 +0.008	0.16	2.70 lbf (12 N)	11.91 lbf (53 N)	-	-	611.5-M12
616-M16-K	-	-	M 16	0.30	1.260 +0.008	0.20	10.12 lbf (45 N)	22.48 lbf (100 N)	-	-	611.5-M16

Part Number	d₁ Type S	Type SS	Type K	d₂	Length l +0.008	w Compression	Spring load ≈ Standard (Type S / K) Initial	End	High (Type SS) Initial	End	Part number installation tool

616-M5-SS	-	M 5	-	0.09	0.709 +0.008	0.09	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	2.47 lbf (11 N)	8.99 lbf (40 N)	611.5-M5
616-M6-SS	-	M 6	-	0.11	0.787 +0.008	0.10	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	3.37 lbf (15 N)	9.67 lbf (43 N)	611.5-M6
616-M8-SS	-	M 8	-	0.14	0.866 +0.008	0.12	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	4.50 lbf (20 N)	16.86 lbf (75 N)	611.5-M8
616-M10-SS	-	M 10	-	0.16	0.866 +0.008	0.12	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	4.50 lbf (20 N)	16.86 lbf (75 N)	611.5-M10
616-M12-SS	-	M 12	-	0.24	1.102 +0.008	0.16	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	10.12 lbf (45 N)	26.98 lbf (120 N)	611.5-M12
616-M16-SS	-	M 16	-	0.30	1.260 +0.008	0.20	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	14.39 lbf (64 N)	35.97 lbf (160 N)	611.5-M16
616-M20-SS	-	M 20	-	0.39	1.575 +0.008	0.28	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	16.86 lbf (75 N)	43.84 lbf (195 N)	611.5-M20
616-M24-SS	-	M 24	-	0.47	2.047 +0.008	0.39	0.45 lbf (2 N) 1.01 lbf (4.5 N) 1.35 lbf (6 N) 1.35 lbf (6 N) 2.25 lbf (10 N) 2.25 lbf (10 N) 2.70 lbf (12 N) 10.12 lbf (45 N) 11.69 lbf (52 N) 15.74 lbf (70 N)	-	16.86 lbf (75 N)	55.08 lbf (245 N)	611.5-M24

d₁ Type S	Type SS	Type K	d₂	Length l +0.008	w Compression	Spring load ≈ Standard (Type S / K) Initial	End	High (Type SS) Initial	End	Part number installation tool

M 3	-	-	0.04	0.472	0.04	0.45 lbf (2 N)	0.90 lbf (4 N)	-	-	611.5-M3
M 4	-	M 4	0.06	0.591	0.06	1.01 lbf (4.5 N)	3.60 lbf (16 N)	-	-	611.5-M4
M 5	M 5	M 5	0.09	0.709	0.09	1.35 lbf (6 N)	4.27 lbf (19 N)	2.47 lbf (11 N)	8.99 lbf (40 N)	611.5-M5
M 6	M 6	M 6	0.11	0.787	0.10	1.35 lbf (6 N)	4.27 lbf (19 N)	3.37 lbf (15 N)	9.67 lbf (43 N)	611.5-M6
M 8	M 8	M 8	0.14	0.866	0.12	2.25 lbf (10 N)	8.77 lbf (39 N)	4.50 lbf (20 N)	16.86 lbf (75 N)	611.5-M8
M 10	M 10	M 10	0.16	0.866	0.12	2.25 lbf (10 N)	8.77 lbf (39 N)	4.50 lbf (20 N)	16.86 lbf (75 N)	611.5-M10
M 12	M 12	M 12	0.24	1.102	0.16	2.70 lbf (12 N)	11.91 lbf (53 N)	10.12 lbf (45 N)	26.98 lbf (120 N)	611.5-M12
M 16	M 16	M 16	0.30	1.260	0.20	10.12 lbf (45 N)	22.48 lbf (100 N)	14.39 lbf (64 N)	35.97 lbf (160 N)	611.5-M16
M 20	M 20	-	0.39	1.575	0.28	11.69 lbf (52 N)	28.10 lbf (125 N)	16.86 lbf (75 N)	43.84 lbf (195 N)	611.5-M20
M 24	M 24	-	0.47	2.047	0.39	15.74 lbf (70 N)	38.22 lbf (170 N)	16.86 lbf (75 N)	55.08 lbf (245 N)	611.5-M24

3D Product Configurator

Selected Part

Part Number

Total Canadian Dollars (net)

Can$7.94

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	99	Can$7.94
100	249	Can$7.28
250	499	Can$6.62
≥ 500		Can$5.96

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.002 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.