Spring Loaded Positioning Elements GN 513

Product description

Information

Spring loaded positioning elements GN 513 are universal pressure elements used as detents, positioners or for clamping with spring pressure. The spring loaded nose pin can be used for a push-on or push-off operation. In addition the spring loaded nose pin cannot rotate.

At the retracting end (type I), the tapped thread can accept a threaded rod, an operating knob, or any other mating threaded element to pull back on the pin. The opposite tapped threaded end (Type I) can accept a special type or special length of plunger nose pin.

The spring loaded element can be screwed into a mating thread at the hex of the retracting end or the wrench flats at the opposite end of the plunger.

Specification

Threaded body
Steel, zinc plated, blue passivated finish

Nose pin
Steel

Case-hardened
Blackened finish

Spring Identification

Standard spring load (Identification no. 1):
circlip phosphated (anthracite)
High spring load (Identification no. 2):
circlip zinc plated, blue passivated finish

RoHS

Build & Price

Part Number 1 - Standard spring load	Part Number 2 - High spring load	d₁	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	r	s₁	s₂	s₃	t min.	Spring load ≈ Standard (Identification no. 1) Initial	End	Spring load ≈ High (Identification no. 2) Initial	End

513-M12X1.5-I-1	513-M12X1.5-I-2	M 12 x 1.5	0.35	M 4	0.30	0.26	1.10	0.75	0.12	0.24	0.18	0.24	0.31	0.16	0.31	3.60 lbf (16 N)	7.87 lbf (35 N)	4.05 lbf (18 N)	12.59 lbf (56 N)
513-M16X1.5-I-1	513-M16X1.5-I-2	M 16 x 1.5	0.47	M 5	0.35	0.31	1.50	1.06	0.12	0.31	0.24	0.28	0.39	0.24	0.39	5.62 lbf (25 N)	15.96 lbf (71 N)	10.12 lbf (45 N)	28.10 lbf (125 N)
513-M20X1.5-I-1	513-M20X1.5-I-2	M 20 x 1.5	0.57	M 6	0.45	0.39	1.85	1.30	0.16	0.39	0.28	0.35	0.47	0.31	0.47	8.99 lbf (40 N)	29.23 lbf (130 N)	14.61 lbf (65 N)	44.96 lbf (200 N)

Part Number 1 - Standard spring load	Part Number 2 - High spring load	d₁	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	r	s₁	s₂	s₃	t min.	Spring load ≈ Standard (Identification no. 1) Initial	End	Spring load ≈ High (Identification no. 2) Initial	End

513-M12X1.5-K-1	513-M12X1.5-K-2	M 12 x 1.5	0.35	M 4	0.30	0.26	1.10	0.75	0.12	0.24	0.18	0.24	0.31	0.16	0.31	3.60 lbf (16 N)	7.87 lbf (35 N)	4.05 lbf (18 N)	12.59 lbf (56 N)
513-M16X1.5-K-1	513-M16X1.5-K-2	M 16 x 1.5	0.47	M 5	0.35	0.31	1.50	1.06	0.12	0.31	0.24	0.28	0.39	0.24	0.39	5.62 lbf (25 N)	15.96 lbf (71 N)	10.12 lbf (45 N)	28.10 lbf (125 N)
513-M20X1.5-K-1	513-M20X1.5-K-2	M 20 x 1.5	0.57	M 6	0.45	0.39	1.85	1.30	0.16	0.39	0.28	0.35	0.47	0.31	0.47	8.99 lbf (40 N)	29.23 lbf (130 N)	14.61 lbf (65 N)	44.96 lbf (200 N)

Part Number 1 - Standard spring load	Part Number 2 - High spring load	d₁	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	r	s₁	s₂	s₃	t min.	Spring load ≈ Standard (Identification no. 1) Initial	End	Spring load ≈ High (Identification no. 2) Initial	End

513-M12X1.5-H-1	513-M12X1.5-H-2	M 12 x 1.5	0.35	M 4	0.30	0.26	1.10	0.75	0.12	0.24	0.18	0.24	0.31	0.16	0.31	3.60 lbf (16 N)	7.87 lbf (35 N)	4.05 lbf (18 N)	12.59 lbf (56 N)
513-M16X1.5-H-1	513-M16X1.5-H-2	M 16 x 1.5	0.47	M 5	0.35	0.31	1.50	1.06	0.12	0.31	0.24	0.28	0.39	0.24	0.39	5.62 lbf (25 N)	15.96 lbf (71 N)	10.12 lbf (45 N)	28.10 lbf (125 N)
513-M20X1.5-H-1	513-M20X1.5-H-2	M 20 x 1.5	0.57	M 6	0.45	0.39	1.85	1.30	0.16	0.39	0.28	0.35	0.47	0.31	0.47	8.99 lbf (40 N)	29.23 lbf (130 N)	14.61 lbf (65 N)	44.96 lbf (200 N)

Part Number 1 - Standard spring load	Part Number 2 - High spring load	d₁	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	r	s₁	s₂	s₃	t min.	Spring load ≈ Standard (Identification no. 1) Initial	End	Spring load ≈ High (Identification no. 2) Initial	End

513-M12X1.5-P-1	513-M12X1.5-P-2	M 12 x 1.5	0.35	M 4	0.30	0.26	1.10	0.75	0.12	0.24	0.18	0.24	0.31	0.16	0.31	3.60 lbf (16 N)	7.87 lbf (35 N)	4.05 lbf (18 N)	12.59 lbf (56 N)
513-M16X1.5-P-1	513-M16X1.5-P-2	M 16 x 1.5	0.47	M 5	0.35	0.31	1.50	1.06	0.12	0.31	0.24	0.28	0.39	0.24	0.39	5.62 lbf (25 N)	15.96 lbf (71 N)	10.12 lbf (45 N)	28.10 lbf (125 N)
513-M20X1.5-P-1	513-M20X1.5-P-2	M 20 x 1.5	0.57	M 6	0.45	0.39	1.85	1.30	0.16	0.39	0.28	0.35	0.47	0.31	0.47	8.99 lbf (40 N)	29.23 lbf (130 N)	14.61 lbf (65 N)	44.96 lbf (200 N)

d₁	d₂	d₃	d₄	e	l₁	l₂	l₃	l₄	r	s₁	s₂	s₃	t min.	Spring load ≈ Standard (Identification no. 1) Initial	End	Spring load ≈ High (Identification no. 2) Initial	End

M 12 x 1.5	0.35	M 4	0.30	0.26	1.10	0.75	0.12	0.24	0.18	0.24	0.31	0.16	0.31	3.60 lbf (16 N)	7.87 lbf (35 N)	4.05 lbf (18 N)	12.59 lbf (56 N)
M 16 x 1.5	0.47	M 5	0.35	0.31	1.50	1.06	0.12	0.31	0.24	0.28	0.39	0.24	0.39	5.62 lbf (25 N)	15.96 lbf (71 N)	10.12 lbf (45 N)	28.10 lbf (125 N)
M 20 x 1.5	0.57	M 6	0.45	0.39	1.85	1.30	0.16	0.39	0.28	0.35	0.47	0.31	0.47	8.99 lbf (40 N)	29.23 lbf (130 N)	14.61 lbf (65 N)	44.96 lbf (200 N)

3D Product Configurator

Thread d₁

M 12 x 1.5

M 16 x 1.5

M 20 x 1.5

Type

H - Semi-spherical, steel

I - Tapped type

K - Pointed nose, steel

P - Prism (120°)

Identification no.

1 - Standard spring load

2 - High spring load

Selected Part

Part Number

Total Canadian Dollars (net)

Can$13.59

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	99	Can$13.59
100	249	Can$12.46
250	499	Can$11.32
≥ 500		Can$10.19

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.028 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.