The cart is empty.

USA EN

Mexico EN | ES

English English Español English Français

You are here: Product Overview > 3.1 Indexing, Locking, Blocking with Pins and Ball-Shaped Elements > Indexing Plungers > GN 817.6 Indexing Plungers previous product next product

GN 817.6 Indexing Plungers Stainless Steel, with Sensor for Position Monitoring

Photo

Type: EC - Lock-out, with position monitoring

GN 817.6 Stainless Steel Indexing Plungers, with Sensor for Position Monitoring Type: EB - Non lock-out, with position monitoring

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 817.6 Print This Page List of Indexing Plunger Types Electrical Properties of the Sensor / Assembly Instruction IP Protection Classes Load Rating Information ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

Information

Indexing plungers GN 817.6 with sensor for position monitoring allow for electronic monitoring of the plunger pin state. For this purpose, a magnet is integrated into the plunger pin that switches the sensor upon engaging after approx. 2/3 of the locking distance l₁.

The sensor electronics then outputs a high signal, e.g. to a machine control, and indicates this switch state with an LED on the sensor.

To prevent faults, no external magnetic fields should be acting on the indexing plunger. The indexing plungers GN 817.6 are delivered with enclosed sensor (not installed), sensor clip, Allen^® wrench and hex nut.

Specification

Threaded body
Stainless steel AISI 303
Plunger pin chemically nickel plated

Knob
Plastic
Technopolymer (Polyamide PA)

Black, matte finish
Not removable

Magnet
Hard ferrite

Sensor / sensor clip
Plastic
Technopolymer (Polyamide PA)
Black, matte finish

Cable (outer sheath)
Polyurethane PUR, black

Hex nut DIN 439 B / ISO 8675
Stainless steel A2

RoHS

Technical drawing

GN 817.6 Stainless Steel Indexing Plungers, with Sensor for Position Monitoring sketch

Hide technical drawing

Part Options / Table

Type

EB	Non lock-out, with position monitoring
EC	Lock-out, with position monitoring

Connection type

Plug

Part Number	d₁ Pin -0.001/-0.002 Bore +0.001	l₁	l₅ Cable length in meters	d₂ Thread	d₃	d₄	k	l₂	l₃	l₄	A/F	Spring load ≈ Inital	End

817.6-4-6-M8X1-EB-S-0.5	0.157 -0.001/-0.002 / +0.001	0.24	0.5	M 8 x 1	0.63	0.08	0.55	1.63	0.63	0.45	0.39	0.90 lbf (4 N)	2.81 lbf (12.5 N)
817.6-5-8-M10X1-EB-S-0.5	0.197 -0.001/-0.002 / +0.001	0.31	0.5	M 10 x 1	0.75	0.08	0.63	1.83	0.71	0.49	0.47	1.12 lbf (5 N)	4.05 lbf (18 N)
817.6-6-9-M12X1.5-EB-S-0.5	0.236 -0.001/-0.002 / +0.001	0.35	0.5	M 12 x 1.5	0.91	0.08	0.79	2.15	0.87	0.49	0.55	1.35 lbf (6 N)	5.62 lbf (25 N)
817.6-8-12-M16X1.5-EB-S-0.5	0.315 -0.001/-0.002 / +0.001	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	1.91 lbf (8.5 N)	6.29 lbf (28 N)
817.6-10-12-M16X1.5-EB-S-0.5	0.394 -0.001/-0.002 / +0.001	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	2.14 lbf (9.5 N)	8.54 lbf (38 N)
817.6-12-15-M20X1.5-EB-S-0.5	0.472 -0.001/-0.002 / +0.001	0.59	0.5	M 20 x 1.5	1.30	0.08	1.12	3.07	1.30	0.65	0.87	2.59 lbf (11.5 N)	8.99 lbf (40 N)
817.6-16-20-M24X2-EB-S-0.5	0.630 -0.001/-0.002 / +0.001	0.79	0.5	M 24 x 2	1.30	0.08	1.12	3.35	1.50	0.73	1.06	2.92 lbf (13 N)	12.14 lbf (54 N)

Part Number	d₁ Pin -0.001/-0.002 Bore +0.001	l₁	l₅ Cable length in meters	d₂ Thread	d₃	d₄	k	l₂	l₃	l₄	A/F	Spring load ≈ Inital	End

817.6-4-6-M8X1-EC-S-0.5	0.157 -0.001/-0.002 / +0.001	0.24	0.5	M 8 x 1	0.63	0.08	0.55	1.63	0.63	0.45	0.39	0.90 lbf (4 N)	2.81 lbf (12.5 N)
817.6-5-8-M10X1-EC-S-0.5	0.197 -0.001/-0.002 / +0.001	0.31	0.5	M 10 x 1	0.75	0.08	0.63	1.83	0.71	0.49	0.47	1.12 lbf (5 N)	4.05 lbf (18 N)
817.6-6-9-M12X1.5-EC-S-0.5	0.236 -0.001/-0.002 / +0.001	0.35	0.5	M 12 x 1.5	0.91	0.08	0.79	2.15	0.87	0.49	0.55	1.35 lbf (6 N)	5.62 lbf (25 N)
817.6-8-12-M16X1.5-EC-S-0.5	0.315 -0.001/-0.002 / +0.001	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	1.91 lbf (8.5 N)	6.29 lbf (28 N)
817.6-10-12-M16X1.5-EC-S-0.5	0.394 -0.001/-0.002 / +0.001	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	2.14 lbf (9.5 N)	8.54 lbf (38 N)
817.6-12-15-M20X1.5-EC-S-0.5	0.472 -0.001/-0.002 / +0.001	0.59	0.5	M 20 x 1.5	1.30	0.08	1.12	3.07	1.30	0.65	0.87	2.59 lbf (11.5 N)	8.99 lbf (40 N)
817.6-16-20-M24X2-EC-S-0.5	0.630 -0.001/-0.002 / +0.001	0.79	0.5	M 24 x 2	1.30	0.08	1.12	3.35	1.50	0.73	1.06	2.92 lbf (13 N)	12.14 lbf (54 N)

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ Pin -0.001/-0.002 Bore +0.001	l₁	l₅ Cable length in meters	d₂ Thread	d₃	d₄	k	l₂	l₃	l₄	A/F	Spring load ≈ Inital	End

0.157	0.24	0.5	M 8 x 1	0.63	0.08	0.55	1.63	0.63	0.45	0.39	0.90 lbf (4 N)	2.81 lbf (12.5 N)
0.197	0.31	0.5	M 10 x 1	0.75	0.08	0.63	1.83	0.71	0.49	0.47	1.12 lbf (5 N)	4.05 lbf (18 N)
0.236	0.35	0.5	M 12 x 1.5	0.91	0.08	0.79	2.15	0.87	0.49	0.55	1.35 lbf (6 N)	5.62 lbf (25 N)
0.315	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	1.91 lbf (8.5 N)	6.29 lbf (28 N)
0.394	0.47	0.5	M 16 x 1.5	1.10	0.08	0.94	2.54	1.02	0.57	0.67	2.14 lbf (9.5 N)	8.54 lbf (38 N)
0.472	0.59	0.5	M 20 x 1.5	1.30	0.08	1.12	3.07	1.30	0.65	0.87	2.59 lbf (11.5 N)	8.99 lbf (40 N)
0.630	0.79	0.5	M 24 x 2	1.30	0.08	1.12	3.35	1.50	0.73	1.06	2.92 lbf (13 N)	12.14 lbf (54 N)

Build & Price

3D Product Configurator

Electrical Properties of the Sensor

Output function

Normally open (NO)

Switch output

PNP

Supply voltage

10 - 30 V DC

Continuous current I_a

≤ 100 mA

Connection type
Plug (S)

3-pole plug M8x1,
freely rotating with knurled screw connection, with PUR cable 0.5 m

Protection class

IP 67

Switching frequency

1,000 Hz

Power consumption

≤ 8 mA

Voltage drop

≤ 2.5 V

Protection class

III

Response sensitivity

2.8 mT

Temperature range

-13 °F to + 167 °F (-25 °C to +75 °C)

Shock and vibration resistance

30 g, 11 ms / 10 - 55 Hz, 1 mm

EMC

According to EN 60947-5-2

Reverse polarity protection

Yes

Short-circuit protection

Yes

**Activation impulse
**suppression

Yes

Approvals,
conformity declarations

Assembly Instruction

The position of the sensor cable can be freely determined when installing the sensor clip.

Installation steps:

Insert the sensor into the sensor clip from the side.
Tighten the hex socket screw of the sensor.
Clip the sensor clip into the ring slot of the indexing plunger in any orientation and then adjust the direction by turning, if necessary.

Selected Part

Part Number

Total Canadian Dollars (net)

Can$167.44

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	24	Can$167.44
25	49	Can$153.49
50	99	Can$139.53
≥ 100		Can$125.58

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.059 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.