Indexing Plungers GN 717

Product description

Information

GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally suitable due to their prevention of misalignments and positioning errors of mating indexing bores.

Lock-out types C / CK are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

During assembly, the maximum tightening torques shown in the table should not be exceeded when securing the lock nut.

Specification

Threaded body
SteelST, zinc plated, blue passivated finish

Plunger pin
Stainless steel AISI 303

Spring
Stainless steel AISI 301

Knob
Plastic
Technopolymer (Polyamide PA)

Temperature resistant up to 230 °F (110 °C)
Black, matte finish
Not removable

Lock nut

Inch size
ANSI/ASME B18.2.2
Steel, zinc plated, blue passivated finish
Metric size
DIN 439 B / ISO 4035 / ISO 8675
Steel, zinc plated, blue passivated finish

RoHS

Build & Price

Part Number B - Non lock-out, without lock nut	Part Number BK - Non lock-out, with lock nut	Part Number C - Lock-out, without lock nut	Part Number CK - Lock-out, with lock nut	d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End


717-5-3/8X16-B-ST	717-5-3/8X16-BK-ST	717-5-3/8X16-C-ST	717-5-3/8X16-CK-ST	0.20 -0.002 / +0.001/+0.003	3/8 x 16	0.71	0.45	1.67	0.20	0.63	0.24	0.53	1.81	0.37	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-1/2X13-B-ST	717-6-1/2X13-BK-ST	717-6-1/2X13-C-ST	717-6-1/2X13-CK-ST	0.24 -0.002 / +0.001/+0.003	1/2 x 13	0.83	0.54	2.05	0.24	0.79	0.30	0.65	2.17	0.41	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-5/8X11-B-ST	717-8-5/8X11-BK-ST	717-8-5/8X11-C-ST	717-8-5/8X11-CK-ST	0.31 -0.002 / +0.001/+0.003	5/8 x 11	0.98	0.77	2.50	0.31	0.94	0.35	0.81	2.68	0.53	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-5/8X11-B-ST	717-10-5/8X11-BK-ST	717-10-5/8X11-C-ST	717-10-5/8X11-CK-ST	0.39 -0.002 / +0.001/+0.003	5/8 x 11	0.98	0.77	2.66	0.39	1.02	0.35	0.89	2.85	0.55	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)
717-3-M6-B-ST	717-3-M6-BK-ST	717-3-M6-C-ST	717-3-M6-CK-ST	0.12 -0.002 / +0.001/+0.003	M 6	0.47	0.27	1.18	0.14	0.47	0.18	0.39	1.28	0.28	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-3-M6X0.75-B-ST	717-3-M6X0.75-BK-ST	717-3-M6X0.75-C-ST	717-3-M6X0.75-CK-ST	0.12 -0.002 / +0.001/+0.003	M 6 x 0.75	0.47	0.27	1.18	0.14	0.47	0.18	0.39	1.28	0.28	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M6-B-ST	717-4-M6-BK-ST	717-4-M6-C-ST	717-4-M6-CK-ST	0.16 -0.002 / +0.001/+0.003	M 6	0.47	0.27	1.20	0.16	0.47	0.18	0.39	1.30	0.28	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
717-4-M8X1-B-ST	717-4-M8X1-BK-ST	717-4-M8X1-C-ST	717-4-M8X1-CK-ST	0.16 -0.002 / +0.001/+0.003	M 8 x 1	0.63	0.36	1.56	0.18	0.63	0.24	0.53	1.69	0.37	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8-B-ST	717-5-M8-BK-ST	717-5-M8-C-ST	717-5-M8-CK-ST	0.20 -0.002 / +0.001/+0.003	M 8	0.63	0.36	1.57	0.20	0.63	0.24	0.53	1.71	0.37	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M8X1-B-ST	717-5-M8X1-BK-ST	717-5-M8X1-C-ST	717-5-M8X1-CK-ST	0.20 -0.002 / +0.001/+0.003	M 8 x 1	0.63	0.36	1.57	0.20	0.63	0.24	0.53	1.71	0.37	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
717-5-M10X1-B-ST	717-5-M10X1-BK-ST	717-5-M10X1-C-ST	717-5-M10X1-CK-ST	0.20 -0.002 / +0.001/+0.003	M 10 x 1	0.71	0.45	1.67	0.20	0.63	0.24	0.53	1.81	0.37	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
717-6-M10-B-ST	717-6-M10-BK-ST	717-6-M10-C-ST	717-6-M10-CK-ST	0.24 -0.002 / +0.001/+0.003	M 10	0.71	0.45	1.93	0.24	0.79	0.30	0.67	2.05	0.41	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
717-6-M12X1.5-B-ST	717-6-M12X1.5-BK-ST	717-6-M12X1.5-C-ST	717-6-M12X1.5-CK-ST	0.24 -0.002 / +0.001/+0.003	M 12 x 1.5	0.83	0.54	2.05	0.24	0.79	0.30	0.65	2.17	0.41	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
717-8-M12-B-ST	717-8-M12-BK-ST	717-8-M12-C-ST	717-8-M12-CK-ST	0.31 -0.002 / +0.001/+0.003	M 12	0.83	0.54	2.32	0.31	0.94	0.35	0.81	2.50	0.53	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M12X1.5-B-ST	717-8-M12X1.5-BK-ST	717-8-M12X1.5-C-ST	717-8-M12X1.5-CK-ST	0.31 -0.002 / +0.001/+0.003	M 12 x 1.5	0.83	0.54	2.32	0.31	0.94	0.35	0.81	2.50	0.53	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
717-8-M16X1.5-B-ST	717-8-M16X1.5-BK-ST	717-8-M16X1.5-C-ST	717-8-M16X1.5-CK-ST	0.31 -0.002 / +0.001/+0.003	M 16 x 1.5	0.98	0.77	2.50	0.31	0.94	0.35	0.81	2.68	0.53	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
717-10-M16X1.5-B-ST	717-10-M16X1.5-BK-ST	717-10-M16X1.5-C-ST	717-10-M16X1.5-CK-ST	0.39 -0.002 / +0.001/+0.003	M 16 x 1.5	0.98	0.77	2.66	0.39	1.02	0.35	0.89	2.85	0.55	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.20	3/8 x 16	0.71	0.45	1.67	0.20	0.63	0.24	0.53	1.81	0.37	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.24	1/2 x 13	0.83	0.54	2.05	0.24	0.79	0.30	0.65	2.17	0.41	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.31	5/8 x 11	0.98	0.77	2.50	0.31	0.94	0.35	0.81	2.68	0.53	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.39	5/8 x 11	0.98	0.77	2.66	0.39	1.02	0.35	0.89	2.85	0.55	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

d₁ Pin -0.002 Bore +0.001/+0.003	d₂ Thread	d₄	e	l₁	l₂	l₃	l₄	l₅ min.	l₆	l₇	A/F	Max. tightening torque in Nm	Spring load ≈ Initial	End

0.12	M 6	0.47	0.27	1.18	0.14	0.47	0.18	0.39	1.28	0.28	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.12	M 6 x 0.75	0.47	0.27	1.18	0.14	0.47	0.18	0.39	1.28	0.28	0.24	3	0.67 lbf (3 N)	2.70 lbf (12 N)
0.16	M 6	0.47	0.27	1.20	0.16	0.47	0.18	0.39	1.30	0.28	0.24	2	0.67 lbf (3 N)	2.70 lbf (12 N)
0.16	M 8 x 1	0.63	0.36	1.56	0.18	0.63	0.24	0.53	1.69	0.37	0.31	8	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 8	0.63	0.36	1.57	0.20	0.63	0.24	0.53	1.71	0.37	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 8 x 1	0.63	0.36	1.57	0.20	0.63	0.24	0.53	1.71	0.37	0.31	7	1.12 lbf (5 N)	5.40 lbf (24 N)
0.20	M 10 x 1	0.71	0.45	1.67	0.20	0.63	0.24	0.53	1.81	0.37	0.39	22	1.12 lbf (5 N)	5.40 lbf (24 N)
0.24	M 10	0.71	0.45	1.93	0.24	0.79	0.30	0.67	2.05	0.41	0.39	15	1.12 lbf (5 N)	4.72 lbf (21 N)
0.24	M 12 x 1.5	0.83	0.54	2.05	0.24	0.79	0.30	0.65	2.17	0.41	0.47	38	1.12 lbf (5 N)	4.72 lbf (21 N)
0.31	M 12	0.83	0.54	2.32	0.31	0.94	0.35	0.81	2.50	0.53	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.31	M 12 x 1.5	0.83	0.54	2.32	0.31	0.94	0.35	0.81	2.50	0.53	0.47	20	1.35 lbf (6 N)	4.95 lbf (22 N)
0.31	M 16 x 1.5	0.98	0.77	2.50	0.31	0.94	0.35	0.81	2.68	0.53	0.67	80	1.35 lbf (6 N)	4.95 lbf (22 N)
0.39	M 16 x 1.5	0.98	0.77	2.66	0.39	1.02	0.35	0.89	2.85	0.55	0.67	80	0.90 lbf (4 N)	6.07 lbf (27 N)

3D Product Configurator

Selected Part

Part Number

Total Canadian Dollars (net)

Can$10.04

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	99	Can$10.04
100	249	Can$9.21
250	499	Can$8.37
≥ 500		Can$7.53

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.031 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.