EN 132.9 Two-Way Connector Clamps Plastic

Information

The clamping bore axes of the two-way connector clamps EN 132.9 are arranged at an angle of 90° to each other. They hold typical construction tubes with full surface contact over the entire cross-section of the bore.

At the screw locations z, the socket cap screws reduce the bore cross-section for clamping. Adapter bushings EN 290 can be used to reduce the bore cross-sections to a smaller diameter.

For clamping without tools, the socket cap screws can be replaced by the adjustable levers GN 911.9 listed in the table as accessories.

The plastic used in version V is made from blue, visually detectable and FDA compliant plastic granulate as per FDA CFR.21 and EU 10/2011.

Specification

Body
Plastic
Technopolymer (Polyamide PA)

• Glass fiber reinforced
• Temperature resistant up to 212 °F (100 °C)
• Black, RAL 9005, matte finishS
• Gray, RAL 7040, matte finishG
• Blue, RAL 5005, matte finishV
  FDA compliant plastic granulate
  Visually detectable

Socket cap screws DIN 912
Stainless steel AISI 304

Hex nuts DIN 985

• Stainless steel AISI 304
• Self-locking with polyamide ring

RoHS

Accessory

Adapter Bushings EN 290
Adjustable Levers GN 911.9