Control Levers GN 210

Bore code: BK - Without keyway, with clamping
Finish: SR - Silver, RAL 9006, textured finish

Standard Sheet GN 210 Print This Page Keyways WN 6885 / DIN 6885-1 Square Bores WN 79 ISO Fundamental Tolerances Plastic Characteristics

Product description

Control Levers GN 210 are used to drive shafts, such as for switching gears and engaging clutches or operating valves and latches.

The torque is transmitted through a positive connection either via a parallel key or a square drive. This ensures a defined angular position between the shaft and the handle. The angular positioncan be freely defined using control levers with smooth bore.

Control levers with parallel key or square drive can be secured axially with a countersunk washer. The versions with clamping transmit torques and forces with zero backlash via frictional locking and secure the hub axially. They are easy to install and allow for subsequent adjustment.

The rotational angle of the control levers can be held with spring plungers or limited with dowel pins. An application-specific rotational angle can be defined by using two dowel pins.

Specification

Handle
Zinc die-castZD

Powder coated
- Silver, RAL 9006, textured finishSR
- Black, RAL 9005, textured finishSW
Metric Keyway DIN 6885-1
- P9 for type K
- JS9 for type KK
Inch Keyway WN 6885
+0.002/-0 for type K / KK

Cap
Plastic, polyamide (PA)

Removable
Gray for SR
Black for SW

Socket cap screw ISO 4762
for bore code BK / KK / VK
Stainless steel

RoHS

Accessory

Parallel Keys DIN 6885 (Steel)
Parallel Keys DIN 6885 (Stainless Steel)
Countersunk Washers GN 184 (Steel, Blackened Finish)
Countersunk Washers GN 184 (Steel, Zinc Plated)
Countersunk Washers GN 184.5 (Stainless Steel)
Short Press-Fit Ball Plungers GN 614 (Plastic)
Short Press-Fit Ball Plungers GN 614 (Stainless Steel)

On request

Inch bores

B	Without keyway, without clamping
BK	Without keyway, with clamping
K	With keyway, without clamping
KK	With keyway, with clamping
V	With double square, without clamping
VK	With double square, with clamping

Part Number SR	Part Number SW	d₁	d₂ H7 B / BK / K / KK	s H11 V / VK	b	d₃	d₄	d₅	h₁	h₂	h₃	Length l	r	t	M_A max. in Nm

210-32-B8-N-ZD-SR	210-32-B8-N-ZD-SW	1.26	0.31 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	-
210-32-B10-N-ZD-SR	210-32-B10-N-ZD-SW	1.26	0.39 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	-
210-40-B10-N-ZD-SR	210-40-B10-N-ZD-SW	1.57	0.39 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	-
210-40-B12-N-ZD-SR	210-40-B12-N-ZD-SW	1.57	0.47 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	-
210-50-B12-N-ZD-SR	210-50-B12-N-ZD-SW	1.97	0.47 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	-
210-50-B14-N-ZD-SR	210-50-B14-N-ZD-SW	1.97	0.55 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	-

Part Number SR	Part Number SW	d₁	d₂ H7 B / BK / K / KK	s H11 V / VK	b	d₃	d₄	d₅	h₁	h₂	h₃	Length l	r	t	M_A max. in Nm

210-32-BK8-N-ZD-SR	210-32-BK8-N-ZD-SW	1.26	0.31 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	2.9
210-32-BK10-N-ZD-SR	210-32-BK10-N-ZD-SW	1.26	0.39 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	2.9
210-40-BK10-N-ZD-SR	210-40-BK10-N-ZD-SW	1.57	0.39 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	5.7
210-40-BK12-N-ZD-SR	210-40-BK12-N-ZD-SW	1.57	0.47 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	5.7
210-50-BK12-N-ZD-SR	210-50-BK12-N-ZD-SW	1.97	0.47 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	10
210-50-BK14-N-ZD-SR	210-50-BK14-N-ZD-SW	1.97	0.55 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	10

Part Number SR	Part Number SW	d₁	d₂ H7 B / BK / K / KK	s H11 V / VK	b	d₃	d₄	d₅	h₁	h₂	h₃	Length l	r	t	M_A max. in Nm

210-32-K8-N-ZD-SR	210-32-K8-N-ZD-SW	1.26	0.31 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	-
210-32-K10-N-ZD-SR	210-32-K10-N-ZD-SW	1.26	0.39 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	-
210-40-K10-N-ZD-SR	210-40-K10-N-ZD-SW	1.57	0.39 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	-
210-40-K12-N-ZD-SR	210-40-K12-N-ZD-SW	1.57	0.47 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	-
210-50-K12-N-ZD-SR	210-50-K12-N-ZD-SW	1.97	0.47 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	-
210-50-K14-N-ZD-SR	210-50-K14-N-ZD-SW	1.97	0.55 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	-

Part Number SR	Part Number SW	d₁	d₂ H7 B / BK / K / KK	s H11 V / VK	b	d₃	d₄	d₅	h₁	h₂	h₃	Length l	r	t	M_A max. in Nm

210-32-KK8-N-ZD-SR	210-32-KK8-N-ZD-SW	1.26	0.31 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	2.9
210-32-KK10-N-ZD-SR	210-32-KK10-N-ZD-SW	1.26	0.39 H7	-	0.59	0.17 +0.008	0.16	0.74	0.587 -0.008	0.13	1.42	3.60	0.39	0.24	2.9
210-40-KK10-N-ZD-SR	210-40-KK10-N-ZD-SW	1.57	0.39 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	5.7
210-40-KK12-N-ZD-SR	210-40-KK12-N-ZD-SW	1.57	0.47 H7	-	0.73	0.20 +0.008	0.20	0.93	0.752 -0.008	0.11	1.73	4.49	0.49	0.30	5.7
210-50-KK12-N-ZD-SR	210-50-KK12-N-ZD-SW	1.97	0.47 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	10
210-50-KK14-N-ZD-SR	210-50-KK14-N-ZD-SW	1.97	0.55 H7	-	0.91	0.24 +0.008	0.24	1.20	0.929 -0.008	0.16	2.17	5.59	0.63	0.35	10

GN 210 Control Levers Zinc Die-Cast