Two Spoked Handwheels EN 522.8

Product description

Information

Two spoked handwheels EN 522.8 are similar to EN 522 two spoked handwheels. However, they have an added housing to accept EN 000.8 or EN 000.3 position indicators, and a set screw with serrated tip is also provided in the hub for easy assembly to a shaft.

For heavier torque adjustments, the hub bore can be provided with a keyway.

The shape of these handwheels does not only meet all demands for modern design but also functions ergonomically.

Resistant to solvents, oils, grease and other chemical agents.

No mounting hole in handwheel rim for handwheel without handle. Handle shipped loose; mounting of handle is required.

Specification

Handwheel body
Plastic
Technoplymer (Polypropylene PP)

Reinforced, shock-resistant
Temperature resistant up to 176 °F (80 °C)
Black, matte finish

Hub Bushing
Steel, blackened finish

Brass threaded bushing to accept the revolving handle

Housing for position indicator

Technopolymer (Polyamide PA)
Glass fiber reinforced

Revolving handle
Plastic
Technopolymer (Polyamide PA)
Black, matte finish

Set screw DIN 916
With internal hex and serrated point

RoHS

Accessory

Position Indicators EN 000.8
Position Indicators EN 000.3

Build & Price

Part Number A - Without handle	Part Number D - With revolving handle	d₁	d₂ H7 Bore	d₃	d₄	d₅	b	l₁	l₂	l₃	l₄	r	Ø Cylindrical handle	for position indicators EN 000.8 Size	EN 000.3 Size


522.8-160-B14-A	522.8-160-B14-D	6.30	0.551 H7	1.02	1.57	2.99	0.98	1.06	2.01	0.47	3.15	2.56	0.94	2.36	2.36
522.8-200-B16-A	522.8-200-B16-D	7.87	0.630 H7	1.18	1.97	2.99	1.10	1.34	2.40	0.47	3.15	3.31	0.94	2.36	2.36
522.8-250-B20-A	522.8-250-B20-D	9.84	0.787 H7	1.38	2.28	2.99	1.26	1.50	2.76	0.47	3.54	4.13	0.98	2.36	2.36

d₁	d₂ H7 Bore	d₃	d₄	d₅	b	l₁	l₂	l₃	l₄	r	Ø Cylindrical handle	for position indicators EN 000.8 Size	EN 000.3 Size

6.30	0.551	1.02	1.57	2.99	0.98	1.06	2.01	0.47	3.15	2.56	0.94	2.36	2.36
7.87	0.630	1.18	1.97	2.99	1.10	1.34	2.40	0.47	3.15	3.31	0.94	2.36	2.36
9.84	0.787	1.38	2.28	2.99	1.26	1.50	2.76	0.47	3.54	4.13	0.98	2.36	2.36

3D Product Configurator

Outside diameter d₁

6.30

7.87

9.84

Bore code

B - Without keyway

Bore diameter d₂

0.551

0.630

0.787

Type

A - Without handle

D - With revolving handle

Installation Instructions

Install the handwheel to the spindle and fasten it with the set screw.

2.Turn the spindle to the starting point (0 position).

Move the position indicator to the 0 position by turning the outer gear wheel.
Install the position indicator into the recess of the hub and fasten it with a set screw. To avoid deformation of the housing, do not apply unnecessary excessive torque!
Check by turning the handwheel to ensure that the starting position of the spindle coincides with the 0 position of the two pointers (EN 000.8) or respectively pointer and counter (EN 000.3). If necessary, take out and readjust the position indicator.

Selected Part

Part Number

Total Canadian Dollars (net)

Can$92.71

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	6	Can$92.71
7	99	Can$89.34
100	249	Can$84.28
≥ 250		Can$75.85

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.749 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.