Solid Disk Handwheels EN 521.8

Product description

Information

These solid disk handwheels EN 521.8 have a recess in the hub to accept EN 000.8 or EN 000.3 position indicators.

If application requires occasional removal of position indicator, handwheel may be ordered upon request with an EN 576 cover disk to shroud the empty recess.

For heavier torque adjustments, the hub bore can be provided with a keyway.

The shape of these handwheels does not only meet all demands for modern design but also functions ergonomically.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Body
Plastic
Technopolymer (Polyamide PA)

Reinforced, shock resistant
Temperature resistant up to 212 °F (100 °C)
Black, matte finish

Hub bushing
Steel, blackened finish

Brass threaded bushing to accept
the revolving handle

Revolving handle
Plastic
Technopolymer (Polyamide)
Black, matte finish

Set screw DIN 916
With internal hex and serrated point

RoHS

On request

Solid disk handwheel with retractable handle
Solid disk handwheel with stainless steel bushing

Build & Price

Part Number	d₁	d₂ H7 Bore		d₃	d₄	d₅	b	l₁	l₂ ≈	l₃	l₄	r	Ø Handle	For position indicators EN 000.8 EN 000.3 Size	GN 000.3 Size

521.8-125-B8-D	4.92	B 8 H7	B 10	0.87	1.38	2.99	1.06	0.87	2.48	1.61	2.56	1.93	0.87	2.36	2.36
521.8-125-B10-D	4.92	B 8 H7	B 10	0.87	1.38	2.99	1.06	0.87	2.48	1.61	2.56	1.93	0.87	2.36	2.36
521.8-200-B16-D	7.87	B 16 H7	B 20	1.18	1.65	2.99	1.50	1.34	2.76	1.57	3.54	3.15	0.98	2.36	2.36
521.8-200-B20-D	7.87	B 16 H7	B 20	1.18	1.65	2.99	1.50	1.34	2.76	1.57	3.54	3.15	0.98	2.36	2.36

d₁	d₂ H7 Bore		d₃	d₄	d₅	b	l₁	l₂ ≈	l₃	l₄	r	Ø Handle	For position indicators EN 000.8 EN 000.3 Size	GN 000.3 Size

4.92	B 8	B 10	0.87	1.38	2.99	1.06	0.87	2.48	1.61	2.56	1.93	0.87	2.36	2.36
7.87	B 16	B 20	1.18	1.65	2.99	1.50	1.34	2.76	1.57	3.54	3.15	0.98	2.36	2.36

3D Product Configurator

Outside diameter d₁

4.92

7.87

Bore code

B - Without keyway

Bore diameter d₂

0.31

0.39

0.63

0.79

Type

D - With revolving handle

Installation Instructions

Install the handwheel to the spindle, create cross hole if it's required and fasten it with the set screw.
Turn the spindle to the starting point (0 position).
Move the position indicator to the 0 position by turning the outer gear wheel.
Install the position indicator into the recess of the hub and fasten it with a set screw. To avoid deformation of the housing, do not apply unnecessary excessive torque!
Check by turning the handwheel to ensure that the starting position of the spindle coincides with the 0 position of the two pointers (Position Indicators EN 000.8) or respectively pointer and counter (Position Indicators EN 000.3). If necessary, take out and readjust the position indicator.

Selected Part

Part Number

Total Canadian Dollars (net)

Can$76.10

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	6	Can$76.10
7	99	Can$73.33
100	249	Can$69.18
≥ 250		Can$62.26

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.639 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.