Flat-faced solid disk handwheels GN 923.3 are distinguished by their modern design and are suitable for applications where the handle should occasionally be withdrawn.
When the handle is pulled upward, it locks into a conical recess. The handle is now in its operating position. To fold it down, draw the handle back from the recess and lay it down into the neutral position inside the handwheel face. A compression spring holds the handle in both positions.
The removable plastic cover shrouds the assembly hardware such as screws and countersunk washers, as well as the shaft end.
Aluminum die-cast
Radial and axial runout of the rim < 0.4 mm
Stepped retractable handle GN 798.3
Plastic
Technopolymer
RoHS
Other modifications such as special inch and metric bores, keyways, set screw holes, etc
| B | Without keyway |
| R | With revolving retractable handle |
| d1 | d2 +0.001 Bore | d3 | d4 | b | h | l1 | l2 ≈ | l3 ≈ | r | Ø Handle | recommended countersunk washer |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4.92 | 1/2 | 0.91 | 1.22 | 0.96 | 0.16 | 0.71 | 1.77 | 2.38 | 1.75 | 0.87 | 184-22 |
| 5.51 | 5/8 | 0.91 | 1.42 | 1.02 | 0.16 | 0.75 | 1.85 | 2.97 | 2.05 | 0.94 | 184-22 |
| 6.30 | 5/8 | 0.91 | 1.42 | 1.02 | 0.16 | 0.79 | 1.89 | 2.97 | 2.40 | 0.94 | 184-22 |
| 7.87 | 3/4 | 0.91 | 1.65 | 1.06 | 0.16 | 0.94 | 2.09 | 3.37 | 3.17 | 0.98 | 184-22 |
| d1 | d2 +0.001 Bore | d3 | d4 | b | h | l1 | l2 ≈ | l3 ≈ | r | Ø Handle | recommended countersunk washer |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.94 | 10 | 12 | 0.71 | 1.10 | 0.79 | 0.16 | 0.67 | 1.54 | 2.22 | 1.38 | 0.71 | 184-16 |
| 4.92 | 12 | 14 | 0.91 | 1.22 | 0.96 | 0.16 | 0.71 | 1.77 | 2.38 | 1.75 | 0.87 | 184-22 |
| 5.51 | 14 | 16 | 0.91 | 1.42 | 1.02 | 0.16 | 0.75 | 1.85 | 2.97 | 2.05 | 0.94 | 184-22 |
| 6.30 | 14 | 16 | 0.91 | 1.42 | 1.02 | 0.16 | 0.79 | 1.89 | 2.97 | 2.40 | 0.94 | 184-22 |
| 7.87 | 18 | 20 | 0.91 | 1.65 | 1.06 | 0.16 | 0.94 | 2.09 | 3.37 | 3.17 | 0.98 | 184-22 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Show / Hide columns
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin. To order cross hole GN 110, please call our sales team: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 49 | Can$71.59 |
| 50 | 99 | Can$65.62 |
| 100 | 249 | Can$59.66 |
| ≥ 250 | Can$53.69 |
Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993
