You are here: Product Overview > 1.3 Adjusting with Handwheels and Crank Handles > Solid Disk Handwheels > GN 923 Flat-Faced Solid Disk Handwheels next product

GN 923 Flat-Faced Solid Disk Handwheels Aluminium, Powder Coated, with or without Revolving Handle

Photo

GN 923 Aluminum Flat-Faced Solid Disk Handwheels, Powder Coated, with or without Revolving Handle Type: R - With revolving handle
Color: SR - Silver, RAL 9006, textured finish
Bildvarianten: 80...200

Type: R - With revolving handle
Color: SR - Silver, RAL 9006, textured finish
Bildvarianten: 80...200

GN 923 Aluminum Flat-Faced Solid Disk Handwheels, Powder Coated, with or without Revolving Handle Type: A - Without revolving handle
Color: SR - Silver, RAL 9006, textured finish
Bildvarianten: 80...200

GN 923 Aluminum Flat-Faced Solid Disk Handwheels, Powder Coated, with or without Revolving Handle Type: A - Without revolving handle
Color: SW - Black, RAL 9005, textured finish
Bildvarianten: 80...200

GN 923 Aluminum Flat-Faced Solid Disk Handwheels, Powder Coated, with or without Revolving Handle Type: R - With revolving handle
Color: SW - Black, RAL 9005, textured finish
Bildvarianten: 50...63

Standard Sheet GN 923 Print This Page Keyways WN 6885 / DIN 6885-1 Cross Holes GN 110 ISO Fundamental Tolerances

Product description

Information

Flat-faced solid disk handwheels GN 923 are distinguished by their modern design.

The removable plastic cover shrouds the assembly hardware such as screws and countersunk washers, as well as the shaft end.

No mounting hole in rim for handwheel without handle. Handle shipped loose; mounting of handle is required.

Specification

Body
Aluminum die-cast

Contact face of hub machined
Rim turned
Radial and axial runout of the rim < 0.4 mm
Powder coated
- Black, RAL 9005, textured finishSW
- Silver, RAL 9006, textured finishSR

Cover
Plastic, Polyamide (PA)
Light gray

Stepped cylindrical revolving handle GN 798.2
Plastic, Polyamide (PA)

Black, matte finish
Spindle
Steel, zinc plated, blue passivated finish

Mini cylindrical revolving handle GN 599.5
Plastic, Polyamide (PA)

Black, matte finish
Spindle
Stainless steel AISI 303

RoHS

Accessory

Countersunk Washers GN 184

Technical drawing

GN 923 Aluminum Flat-Faced Solid Disk Handwheels, Powder Coated, with or without Revolving Handle sketch

Hide technical drawing

Part Options / Table

Bore code

B	Without keyway
K	With keyway

Type

A	Without revolving handle
R	With revolving handle

Part Number SW	Part Number SR	d₁	d₂ H7 Bore	d₃	d₄	b	h	l₁	l₂ ≈	l₃ ≈	r	Ø Handle GN 798.2	Ø Handle GN 599.5	Recommended countersunk washer

923-80-B1/2-A-SW	923-80-B1/2-A-SR	3.15	1/2 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-K1/2-A-SW	923-80-K1/2-A-SR	3.15	1/2 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-100-B1/2-A-SW	923-100-B1/2-A-SR	3.94	1/2 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-K1/2-A-SW	923-100-K1/2-A-SR	3.94	1/2 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-125-B1/2-A-SW	923-125-B1/2-A-SR	4.92	1/2 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-K1/2-A-SW	923-125-K1/2-A-SR	4.92	1/2 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-140-B5/8-A-SW	923-140-B5/8-A-SR	5.51	5/8 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-K5/8-A-SW	923-140-K5/8-A-SR	5.51	5/8 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-160-B5/8-A-SW	923-160-B5/8-A-SR	6.30	5/8 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-K5/8-A-SW	923-160-K5/8-A-SR	6.30	5/8 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-200-B3/4-A-SW	923-200-B3/4-A-SR	7.87	3/4 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-K3/4-A-SW	923-200-K3/4-A-SR	7.87	3/4 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-50-B6-A-SW	923-50-B6-A-SR	1.97	6 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-50-K6-A-SW	923-50-K6-A-SR	1.97	6 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-50-B8-A-SW	923-50-B8-A-SR	1.97	8 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-50-K8-A-SW	923-50-K8-A-SR	1.97	8 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-63-B8-A-SW	923-63-B8-A-SR	2.48	8 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-63-K8-A-SW	923-63-K8-A-SR	2.48	8 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-63-B10-A-SW	923-63-B10-A-SR	2.48	10 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-63-K10-A-SW	923-63-K10-A-SR	2.48	10 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-80-B10-A-SW	923-80-B10-A-SR	3.15	10 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-K10-A-SW	923-80-K10-A-SR	3.15	10 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-B12-A-SW	923-80-B12-A-SR	3.15	12 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-K12-A-SW	923-80-K12-A-SR	3.15	12 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-100-B10-A-SW	923-100-B10-A-SR	3.94	10 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-K10-A-SW	923-100-K10-A-SR	3.94	10 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-B12-A-SW	923-100-B12-A-SR	3.94	12 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-K12-A-SW	923-100-K12-A-SR	3.94	12 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-125-B12-A-SW	923-125-B12-A-SR	4.92	12 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-K12-A-SW	923-125-K12-A-SR	4.92	12 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-B14-A-SW	923-125-B14-A-SR	4.92	14 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-K14-A-SW	923-125-K14-A-SR	4.92	14 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-140-B14-A-SW	923-140-B14-A-SR	5.51	14 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-K14-A-SW	923-140-K14-A-SR	5.51	14 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-B16-A-SW	923-140-B16-A-SR	5.51	16 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-K16-A-SW	923-140-K16-A-SR	5.51	16 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-160-B14-A-SW	923-160-B14-A-SR	6.30	14 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-K14-A-SW	923-160-K14-A-SR	6.30	14 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-B16-A-SW	923-160-B16-A-SR	6.30	16 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-K16-A-SW	923-160-K16-A-SR	6.30	16 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-200-B18-A-SW	923-200-B18-A-SR	7.87	18 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-K18-A-SW	923-200-K18-A-SR	7.87	18 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-B20-A-SW	923-200-B20-A-SR	7.87	20 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-K20-A-SW	923-200-K20-A-SR	7.87	20 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32

Part Number SW	Part Number SR	d₁	d₂ H7 Bore	d₃	d₄	b	h	l₁	l₂ ≈	l₃ ≈	r	Ø Handle GN 798.2	Ø Handle GN 599.5	Recommended countersunk washer

923-80-B1/2-R-SW	923-80-B1/2-R-SR	3.15	1/2 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-K1/2-R-SW	923-80-K1/2-R-SR	3.15	1/2 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-100-B1/2-R-SW	923-100-B1/2-R-SR	3.94	1/2 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-K1/2-R-SW	923-100-K1/2-R-SR	3.94	1/2 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-125-B1/2-R-SW	923-125-B1/2-R-SR	4.92	1/2 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-K1/2-R-SW	923-125-K1/2-R-SR	4.92	1/2 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-140-B5/8-R-SW	923-140-B5/8-R-SR	5.51	5/8 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-K5/8-R-SW	923-140-K5/8-R-SR	5.51	5/8 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-160-B5/8-R-SW	923-160-B5/8-R-SR	6.30	5/8 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-K5/8-R-SW	923-160-K5/8-R-SR	6.30	5/8 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-200-B3/4-R-SW	923-200-B3/4-R-SR	7.87	3/4 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-K3/4-R-SW	923-200-K3/4-R-SR	7.87	3/4 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-50-B6-R-SW	923-50-B6-R-SR	1.97	6 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-50-K6-R-SW	923-50-K6-R-SR	1.97	6 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-50-B8-R-SW	923-50-B8-R-SR	1.97	8 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-50-K8-R-SW	923-50-K8-R-SR	1.97	8 H7	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
923-63-B8-R-SW	923-63-B8-R-SR	2.48	8 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-63-K8-R-SW	923-63-K8-R-SR	2.48	8 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-63-B10-R-SW	923-63-B10-R-SR	2.48	10 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-63-K10-R-SW	923-63-K10-R-SR	2.48	10 H7	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
923-80-B10-R-SW	923-80-B10-R-SR	3.15	10 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-K10-R-SW	923-80-K10-R-SR	3.15	10 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-B12-R-SW	923-80-B12-R-SR	3.15	12 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-80-K12-R-SW	923-80-K12-R-SR	3.15	12 H7	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
923-100-B10-R-SW	923-100-B10-R-SR	3.94	10 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-K10-R-SW	923-100-K10-R-SR	3.94	10 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-B12-R-SW	923-100-B12-R-SR	3.94	12 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-100-K12-R-SW	923-100-K12-R-SR	3.94	12 H7	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
923-125-B12-R-SW	923-125-B12-R-SR	4.92	12 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-K12-R-SW	923-125-K12-R-SR	4.92	12 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-B14-R-SW	923-125-B14-R-SR	4.92	14 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-125-K14-R-SW	923-125-K14-R-SR	4.92	14 H7	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
923-140-B14-R-SW	923-140-B14-R-SR	5.51	14 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-K14-R-SW	923-140-K14-R-SR	5.51	14 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-B16-R-SW	923-140-B16-R-SR	5.51	16 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-140-K16-R-SW	923-140-K16-R-SR	5.51	16 H7	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
923-160-B14-R-SW	923-160-B14-R-SR	6.30	14 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-K14-R-SW	923-160-K14-R-SR	6.30	14 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-B16-R-SW	923-160-B16-R-SR	6.30	16 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-160-K16-R-SW	923-160-K16-R-SR	6.30	16 H7	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
923-200-B18-R-SW	923-200-B18-R-SR	7.87	18 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-K18-R-SW	923-200-K18-R-SR	7.87	18 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-B20-R-SW	923-200-B20-R-SR	7.87	20 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32
923-200-K20-R-SW	923-200-K20-R-SR	7.87	20 H7	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32

Show / Hide columns

Inch

Dimensions in: Inch (change to Metric)

d₁	d₂ H7 Bore	d₃	d₄	b	h	l₁	l₂ ≈	l₃ ≈	r	Ø Handle GN 798.2	Ø Handle GN 599.5	Recommended countersunk washer

3.15	1/2	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
3.94	1/2	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
4.92	1/2	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
5.51	5/8	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
6.30	5/8	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
7.87	3/4	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁	d₂ H7 Bore		d₃	d₄	b	h	l₁	l₂ ≈	l₃ ≈	r	Ø Handle GN 798.2	Ø Handle GN 599.5	Recommended countersunk washer

1.97	6	8	0.79	0.51	0.51	0.28	0.63	1.02	0.79	0.63	-	0.51	184-12
2.48	8	10	0.91	0.67	0.51	0.28	0.63	1.02	0.79	0.81	-	0.51	184-16
3.15	10	12	1.02	0.67	0.51	0.28	0.63	1.02	1.71	1.08	0.63	-	184-16
3.94	10	12	1.10	0.87	0.55	0.37	0.67	1.18	2.28	1.42	0.71	-	184-20
4.92	12	14	1.22	0.87	0.59	0.43	0.71	1.30	2.40	1.79	0.87	-	184-20
5.51	14	16	1.42	1.12	0.65	0.51	0.75	1.42	2.99	2.05	0.94	-	184-25
6.30	14	16	1.42	1.12	0.71	0.57	0.79	1.54	2.99	2.40	0.94	-	184-25
7.87	18	20	1.65	1.42	0.81	0.63	0.94	1.77	3.35	3.05	0.98	-	184-32

Build & Price

3D Product Configurator

GN 110 Cross Holes (Special Order) - Metric

Show / Hide columns

d₁ / s	d₁ / s	d₂ H11	d₃ Thread	Length l Standard version	Length l Handwheels DIN 950 / GN 949 up to Ø 250 mm

6	7	2.5	M 3	4.5	-
8	9	3	M 5	5.5	4.5
10	11	3	M 5	5.5	4.5
12	13	4	M 6	6.5	5.5
14	15	4	M 6	6.5	5.5
16	17	5	M 6	8	7
18	19	5	M 6	8	7
20	21	5	M 6	8	7
22	23	6	M 6	10	9
24	25	6	M 6	10	9
26	27	6	M 6	10	9

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d₂ pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch

Show / Hide columns

d₁ / s	d₂ +0.003/-0.001	d₃ Thread	Length l

1/4	3/32	6x32	0.188
5/16	1/8	10x32	0.2
3/8	1/8	10x32	0.2
1/2	5/32	1/4x20	0.25
9/16	5/32	1/4x20	0.25
5/8	3/16	1/4x20	0.312
11/16	3/16	1/4x20	0.312
3/4	3/16	1/4x20	0.312
13/16	1/4	1/4x20	0.375
1	1/4	5/16x18	0.375
1 1/16	1/4	5/16x18	0.375
1 1/18	1/4	5/16x18	0.375
1 1/14	1/4	5/16x18	0.375

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Part Number

Total Canadian Dollars (net)

Can$48.67

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$48.67
50	99	Can$44.61
100	249	Can$40.56
≥ 250		Can$36.50

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.264 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.