Hinges with integrated safety switch GN 139.1 are designed for use on monitoring doors and covers of machines and equipment. Opening the door activates the switch contacts. This causes an interruption in a protective circuit via broken contact (NC) and at the same time signals the door opening by closing a normally open contact element (NO).
The contact blocks include positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached is adjustable.
The compact construction combines safety and attractive design. The hinges are tamper-proof because of the covered mounting from the backside.
Body
Zinc die-cast
Powder coated
Silver metallic
Pin
Stainless steel AISI 303
RoHS
Flat Mounting Plates GN 139.3
Angled Mounting Plates GN 139.4
Hinges with operating angle > 0°
Hinges with other contact load ratings
| AK | Cable at the top |
| BK | Cable at the bottom |
| CK | Cable at the backside |
| l1 Small hinge wing | Broad hinge wing | l2 | l3 | l4 | l5 Small hinge wing | Broad hinge wing | l6 Cable length in meters | h1 | h2 | m1 | m2 | m3 Small hinge wing | Broad hinge wing |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.93 | 3.11 | 3.98 | 1.18 | 3.19 | 0.59 | 1.18 | 2 | 5 | 0.47 | 0.89 | 2.80 | 0.67 | 1.06 | 1.97 |
|
Maximal load Information with safety factor |
|
|
|
|
|||||||
|
Examples of calculation |
l1= 49 mm |
337.21 lbf (1500 N) |
224.81 lbf (1000 N) |
224.81 lbf (1000 N) |
|||||||
|
l1= 79 mm |
168.61 lbf (750 N) |
112.40 lbf (500 N) |
112.40 lbf (500 N) |
||||||||
|
Assembly |
From the backside, 7 x threads M5, 6 mm deep |
||||||||||
|
Recommended torque |
5 Nm (Screws M5) |
||||||||||
|
Protection class |
IP67 / IP69K |
acc. to EN 60529 |
|||||||||
|
Switching principle, contact opening |
Slow-action contacts |
acc. to IEC 60947-5-1, K |
|||||||||
|
Contact material |
Silver alloy |
||||||||||
|
Operating travel diagram |
The switching points are adjustable up to 4° in direction of 0°. → see operating instruction |
|
|||||||||
|
Maximum operating frequency |
600 operating cycles / hour |
acc. to IEC 60947-5-1 |
|||||||||
|
Mechanical life span |
106 operating cycles |
||||||||||
|
Actuating speed |
min. 2° / second, max. 90° / second |
||||||||||
|
Utilization Category |
DC 13: 24 Vdc / 2 A (with connector plug) |
acc. to EN 60947-5-1 |
|||||||||
|
Pin and cable assignment |
|
||||||||||
|
Type of cable |
7 x0.5 mm2, jacket PVC H05VV-F |
acc. to IEC 60332-1-2 et seqq. |
|||||||||
|
Short-circuit current |
1000 A |
acc. to EN 60947-5-1 |
|||||||||
|
Rated insulation voltage |
30 V AC / 36 V DC (connector plug) / 250 VAC (cable) |
||||||||||
|
Short-circuit protection |
2 A, 500 V, Type gG (connector plug) / 6 A, 500 V, Type gG (cable) |
||||||||||
|
Ambient temperature |
13 °F up to 176 °F (-25 °C up to + 80 °C) |
||||||||||
|
Degree of pollution, external |
3 |
acc. to EN 60947-5-1 |
|||||||||
|
Mission time (TM) |
20 years |
acc. to EN ISO 13849-1 |
|||||||||
|
Number of cycles (B10 d) |
5 000 000 |
acc. to EN 61820-2 |
|||||||||
|
Low-voltage switchgear and controlgear |
|
|
|
EN 60947-1/2007 |
|||||||
|
Safety applications |
until SIL 3 / PL e |
acc. to EN ISO 13849-1 |
|||||||||
|
Other important details and hints are given in the operating instructions for GN 139.1 hinges which are included with every hinge and which are also available as PDF downloads from “www.jwwinco.com“ under “Service“. |
|||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 9 | Can$292.43 |
| 10 | 24 | Can$268.07 |
| 25 | 49 | Can$243.70 |
| ≥ 50 | Can$219.33 |
Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993
