T-Angle Linear Actuator Connectors GN 192.15

Photo

Type: B - With seals

GN 192.15 Stainless Steel T-Angle Linear Actuator Connectors Type: A - Without seals

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product description

Information

T-angle linear actuator connectors GN 192.15 are based on T-angle connector clamps. The additionally provided mounting holes are used to connect to the drive key of a linear actuator. Bores with the designation G are equipped with sleeve bearings.

With the screw locations z₂, the play of the guide bore d₁ can be adjusted or the linear actuator connectors can be clamped after adjustment. Type B is equipped with seals at the screw locations.

For quick clamping without tools, the cap nuts can be replaced by the adjustable levers GN 911.3 listed in the table as accessories.

Specification

Body
Stainless steel AISI CF-8
Matte shot-blasted

Sleeve bearing
Plastic (PTFE)

Carriage bolt DIN 603
Stainless steel A2

Cap nuts DIN 917 / washers
Stainless steel A2

Seals

Sealing disks
Plastic (Polyacetal POM)
Spacer ring
Silicon, 40 ... 60 Shore A

RoHS

Accessory

Adjustable Levers GN 911.3

Build & Price

Part Number A - Without seals	Part Number B - With seals	d₁ Bore with sleeve bearing	d₂ Bore	b	d₃ Mounting screws on the drive key	k₁ Clamping length	k₂ Clamping length	l₁	l₂	m	z₁ Screw location for screw size	z₂ Screw location for screw size		for z₂ l₃


192.15-G30-B30-A-4	192.15-G30-B30-B-4	G 30	B 30	0.87	M 4	1.46	1.65	3.78	1.38	2.36	M 8	M 8	3.07	2.48	3.07
192.15-G50-B50-A-4	192.15-G50-B50-B-4	G 50	B 50	1.18	M 6	2.56	2.95	5.96	1.91	4.06	M 10	M 10	3.62	3.07	3.62

d₁ Bore with sleeve bearing	d₂ Bore	b	d₃ Mounting screws on the drive key	k₁ Clamping length	k₂ Clamping length	l₁	l₂	m	z₁ Screw location for screw size	z₂ Screw location for screw size		for z₂ l₃

G 30	B 30	0.87	M 4	1.46	1.65	3.78	1.38	2.36	M 8	M 8	3.07	2.48	3.07
G 50	B 50	1.18	M 6	2.56	2.95	5.96	1.91	4.06	M 10	M 10	3.62	3.07	3.62

3D Product Configurator

Bore d₁

G 30

G 50

Bore d₂

B 30

B 50

Type

A - Without seals

B - With seals

Identification no.

4 - With stainless steel cap nut DIN 917

Selected Part

Part Number

Total Canadian Dollars (net)

Can$136.69

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	9	Can$136.69
10	24	Can$125.30
25	49	Can$113.91
≥ 50		Can$102.52

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.705 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.