The clamping bores of T-angle connector clamps GN 194 are not machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462.
The versions with square bores are also suitable for use with profile systems.
At the screw locations z, the socket cap screws reduce the bore cross-section for clamping.
For clamping without tools, the socket cap screws can be replaced by the adjustable levers GN 911 listed in the table as accessories.
RoHS
| 2 | With 4 stainless steel socket cap screws ISO 4762 |
| d1 Bore | s1 Square | d2 Bore | s2 Square | k Clamping length | l1 | l2 | l3 | m | z Screw locations for screw size | Accessory Recom. lever GN 911 for z l4 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| B 20 | V 20 | B 20 | V 20 | 1.97 | 4.72 | 2.68 | 1.81 | 3.39 | M8-35 | 2.48 | 3.07 |
| B 25 | V 25 | B 25 | V 25 | 1.97 | 4.72 | 2.68 | 1.81 | 3.39 | M8-35 | 2.48 | 3.07 |
| B 30 | V 30 | B 30 | V 30 | 1.97 | 4.72 | 2.68 | 1.81 | 3.39 | M8-35 | 2.48 | 3.07 |
| B 30 | V 30 | B 30 | V 30 | 2.36 | 5.55 | 3.11 | 2.32 | 4.00 | M8-50 | 2.48 | 3.07 |
| B 32 | - | B 32 | - | 2.36 | 5.55 | 3.11 | 2.32 | 4.00 | M8-50 | 2.48 | 3.07 |
| B 35 | V 35 | B 35 | V 35 | 2.36 | 5.55 | 3.11 | 2.32 | 4.00 | M8-50 | 2.48 | 3.07 |
| B 40 | V 40 | B 40 | V 40 | 2.36 | 5.55 | 3.11 | 2.32 | 4.00 | M8-50 | 2.48 | 3.07 |
| B 40 | V 40 | B 40 | V 40 | 2.99 | 6.93 | 3.86 | 2.76 | 5.00 | M10-60 | 3.07 | 3.62 |
| B 42 | - | B 42 | - | 2.99 | 6.93 | 3.86 | 2.76 | 5.00 | M10-60 | 3.07 | 3.62 |
| B 45 | V 45 | B 45 | V 45 | 2.99 | 6.93 | 3.86 | 2.76 | 5.00 | M10-60 | 3.07 | 3.62 |
| B 48 | - | B 48 | - | 2.99 | 6.93 | 3.86 | 2.76 | 5.00 | M10-60 | 3.07 | 3.62 |
| B 50 | V 50 | B 50 | V 50 | 2.99 | 6.93 | 3.86 | 2.76 | 5.00 | M10-60 | 3.07 | 3.62 |
| Min | Max | Price |
|---|---|---|
| 1 | 9 | Can$53.00 |
| 10 | 24 | Can$48.59 |
| 25 | 49 | Can$44.17 |
| ≥ 50 | Can$39.75 |
Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993
