Fluid Sight Glasses GN 743.6

Photo

GN 743.6 Aluminum Fluid Sight Glasses, with ESG Safety Glass, ATEX Explosion Protective

Product Family ATEX

ATEX standard parts have been developed for explosion hazard conditions in hydraulics or gear construction. Every product includes a documentation showing the underlying European explosion protection directive (ATEX).

especially for explosion hazard zones

Show all ATEX products

Standard Sheet GN 743.6 Print This Page Operating Instruction GN 743.6 Plastic Characteristics Stainless Steel Characteristics

Product description

Information

Fluid sight glasses GN 743.6 are suitable for use in potentially explosive atmospheres. They comply with the European explosion protection directive (ATEX) 2014/34/EU.

A detailed operating instruction is available and included with every fluid sight glass. In addition, the housings are provided with an ATEX label.

These fluid sight glasses offer a scratch proof sight glass of high stability. The placement of the seal on the outer diameter of the glass eliminates leakage independent from over or under tightening of the sight glass.

The seal is embedded in a radial recess, and thus cannot be lost or squeezed out during tightening.

These fluid sight glasses can also be used on pressurized tanks. Tests regarding maximum pressure are available.

Assembly note:
For wall thicknesses below 0.16 in (4 mm), use GN 7430 thin hex nuts.

Specification

Body
Aluminum
Front surface fine turned

Sight glass
ESG safety glass

Seals
Rubber FPM (Viton^®)

Circlip
Stainless steel AISI 301

Temperature range:
from -4 °F to +302 °F (-20 °C to +150 °C)

RoHS

Accessory

Thin Hex Nuts GN 7430

On request

EPDM seals

Build & Price

Part Number	d₁	d₂ Pipe thread	Fine thread	d₃	l₁	l₂	s

743.6-11-G3/8	0.43	G 3/8	-	0.87	0.31	0.31	0.79
743.6-11-M16X1.5	0.43	-	M 16 x 1.5	0.87	0.31	0.31	0.79
743.6-14-G1/2	0.55	G 1/2	-	1.02	0.33	0.35	0.91
743.6-14-M20X1.5	0.55	-	M 20 x 1.5	1.02	0.33	0.35	0.91
743.6-18-G3/4	0.71	G 3/4	-	1.26	0.35	0.43	1.18
743.6-18-M26X1.5	0.71	-	M 26 x 1.5	1.26	0.35	0.43	1.18
743.6-18-M27X1.5	0.71	-	M 27 x 1.5	1.26	0.35	0.43	1.18
743.6-18-M27X2	0.71	-	M 27 x 2	1.26	0.35	0.43	1.18

d₁	d₂ Pipe thread	Fine thread	d₃	l₁	l₂	s

0.43	G 3/8	M 16 x 1.5	-	-	0.87	0.31	0.31	0.79
0.55	G 1/2	M 20 x 1.5	-	-	1.02	0.33	0.35	0.91
0.71	G 3/4	M 26 x 1.5	M 27 x 1.5	M 27 x 2	1.26	0.35	0.43	1.18

3D Product Configurator

Selected Part

Part Number

Total Canadian Dollars (net)

Can$31.93

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$31.93
50	99	Can$29.27
100	249	Can$26.61
≥ 250		Can$23.95

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.044 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.