Indexing Plungers GN 8170

Photo

GN 8170 Stainless Steel Indexing Plungers, DGUV Certified, Lock-Out and Non Lock-Out, Hygienic Design Type: B - Non lock-out
Identification: FH - Without sealing lock nut, knob side in Hygienic Design

Type: B - Non lock-out
Identification: FH - Without sealing lock nut, knob side in Hygienic Design

GN 8170 Stainless Steel Indexing Plungers, DGUV Certified, Lock-Out and Non Lock-Out, Hygienic Design Type: C - Lock-out
Identification: FH - Without sealing lock nut, knob side in Hygienic Design

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Product Family Hygienic Design

Standard Parts of the “Hygienic Design” product family are labeled with the HD icon. They combine high surface quality, freedom from dead spaces, non-scooped outer surfaces, and sealed bolting areas. A sealing concept based on FEM calculations ensures reliable contact pressure after installation.

suitable for use in hygienically sensitive areas
quick and easy cleaning
no dead spaces due to functional seals
certified according to EHEDG guidelines

Show all Hygienic Design products

FDA compliant

Standard Sheet GN 8170 Print This Page List of Indexing Plunger Types Operating Instruction GN 8170-FH Load Rating Information ISO Fundamental Tolerances Plastic Characteristics Stainless Steel Characteristics DGUV Test Certificate Hygienic Design Information Hygienic Design - Leaflet

Product description

Information

Indexing plungers GN 8170 are certified according to the DGUV Test and meet hygienic requirements on the knob side. Wipers between the knob and the threaded body as well as the sealing ring between the threaded body and the housing keep the mechanics on the knob side sealed. The high surface quality (Ra < 0.8 µm) and the free of dead-space mounting prevent dirt from adhering and facilitate cleaning.

Indexing plungers with lock-out (type C) are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

Mounting holes and through-holes in the housing must be drilled at a right angle, free of burrs and without a chamfer. This ensures that the sealing rings will function after being mounted.

Specification

Threaded body / knob / plunger pin
Stainless steel AISI 316
Plunger pin case-hardened

Spring
Stainless steel AISI 316Ti

Seals

Blue
Temperature resistant from
-13 °F to +230 °F (-25 °C to +110 °C)
FDA compliant
Sealing ring
H-NBRH
Hardness 85 ±5 Shore A
Wiper
TPU
Hardness 95 ±5 Shore A

All moving parts are lubricated with a special, FDA compliant grease

RoHS

Accessory

Sealing Rings GN 7600

Build & Price

Part Number	d₁ Pin -0.003 Bore +0.001	d₂	d₃ Thread	d₄	d₅	l₁	l₂	l₃	k	A/F₁	Spring load ≈ Initial	End

8170-6-B-FH-H	0.236 -0.003 / +0.001	1.38	M 12 x 1.5	0.71	0.90	0.24	0.47	1.96	1.14	0.55	4.50 lbf (20 N)	8.09 lbf (36 N)
8170-8-B-FH-H	0.315 -0.003 / +0.001	1.38	M 16 x 1.5	0.71	0.90	0.31	0.47	2.14	1.14	0.55	4.95 lbf (22 N)	7.19 lbf (32 N)

Part Number	d₁ Pin -0.003 Bore +0.001	d₂	d₃ Thread	d₄	d₅	l₁	l₂	l₃	k	A/F₁	Spring load ≈ Initial	End

8170-6-C-FH-H	0.236 -0.003 / +0.001	1.38	M 12 x 1.5	0.71	0.90	0.24	0.47	1.96	1.14	0.55	4.50 lbf (20 N)	8.09 lbf (36 N)
8170-8-C-FH-H	0.315 -0.003 / +0.001	1.38	M 16 x 1.5	0.71	0.90	0.31	0.47	2.14	1.14	0.55	4.95 lbf (22 N)	7.19 lbf (32 N)

d₁ Pin -0.003 Bore +0.001	d₂	d₃ Thread	d₄	d₅	l₁	l₂	l₃	k	A/F₁	Spring load ≈ Initial	End

0.236	1.38	M 12 x 1.5	0.71	0.90	0.24	0.47	1.96	1.14	0.55	4.50 lbf (20 N)	8.09 lbf (36 N)
0.315	1.38	M 16 x 1.5	0.71	0.90	0.31	0.47	2.14	1.14	0.55	4.95 lbf (22 N)	7.19 lbf (32 N)

3D Product Configurator

Pin diameter d₁

0.236

0.315

Type

B - Non lock-out

C - Lock-out

Identification

FH - Without sealing lock nut, knob side in Hygienic Design

Sealing ring material

H - H-NBR

Selected Part

Part Number

Total Canadian Dollars (net)

Can$139.40

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	9	Can$139.40
10	24	Can$127.79
25	49	Can$116.17
≥ 50		Can$104.55

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.392 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.