Indexing Plungers GN 724.4

Photo

Type: C1 - Chamfer, top
Material: ST - Steel precision casting

GN 724.4 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, Weldable Type: C1 - Chamfer, top
Material: NI - Stainless steel precision casting

GN 724.4 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, Weldable Type: C2 - Chamfer, bottom
Material: ST - Steel precision casting

GN 724.4 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, Weldable Type: C3 - Chamfer, right
Material: ST - Steel precision casting

GN 724.4 Steel / Stainless Steel Indexing Plungers, with Chamfered Pin, Weldable Type: CU - Unassembled
Material: NI - Stainless steel precision casting

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 724.4 Print This Page List of Indexing Plunger Types Stainless Steel Characteristics

Product description

Information

Indexing plungers GN 724.4 have a plunger pin with square cross-section, a latching surface on one side and a chamfer on the other. When the object to be secured moves towards the chamfer, the plunger pin is pushed back into the guide, allowing grooves and edges to pass over the pin. The plunger pin engages automatically in the direction of the latching surface.

The latching can be released by pulling the pull ring by hand or with a cable or pull rod using a hook. The types with lock-out are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the plunger pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.

The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even after welding, applying a corrosion protection layer or in case of contamination.

For fastening by welding, the unassembled type CU is particularly recommended to avoid changes to the microstructure of the material due to heating of the spring and plunger pin. In this case, the indexing plunger is assembled only after the surface treatment of the welded guide.

Specification

Guide

Steel precision castingST
Weldable, blackened finish
Stainless steel precision castingNI AISI CF-8
Weldable

Pull ring

Steel precision casting
Zinc plated, blue passivated finish (for ST)
Stainless steel precision casting AISI CF-8 (for NI)

Plunger pin

Steel, hardened
Zinc plated, blue passivated finish (for ST)
Stainless steel AISI 431, hardened (for NI)

Socket button head screw DIN 7985

Steel, zinc plated (for ST)
Stainless steel AISI 304 (for NI)

Compression spring
Stainless steel AISI 316Ti

RoHS

Build & Price

Part Number	b	s	a	d₁	d₂	l₁ ≈	l₂	l₃	l₄	l₅	Spring load ≈ Initial	End

724.4-13-20-C1-ST	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-13-20-C1-NI	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-20-30-C1-ST	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)
724.4-20-30-C1-NI	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number	b	s	a	d₁	d₂	l₁ ≈	l₂	l₃	l₄	l₅	Spring load ≈ Initial	End

724.4-13-20-C2-ST	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-13-20-C2-NI	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-20-30-C2-ST	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)
724.4-20-30-C2-NI	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number	b	s	a	d₁	d₂	l₁ ≈	l₂	l₃	l₄	l₅	Spring load ≈ Initial	End

724.4-13-20-C3-ST	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-13-20-C3-NI	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-20-30-C3-ST	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)
724.4-20-30-C3-NI	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number	b	s	a	d₁	d₂	l₁ ≈	l₂	l₃	l₄	l₅	Spring load ≈ Initial	End

724.4-13-20-C4-ST	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-13-20-C4-NI	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-20-30-C4-ST	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)
724.4-20-30-C4-NI	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)

Part Number	b	s	a	d₁	d₂	l₁ ≈	l₂	l₃	l₄	l₅	Spring load ≈ Initial	End

724.4-13-20-CU-ST	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-13-20-CU-NI	0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
724.4-20-30-CU-ST	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)
724.4-20-30-CU-NI	0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)

b	s	a	d₁	d₂	l₁ ≈	l₂	l₃	l₄	l₅	Spring load ≈ Initial	End

0.51	0.79	0.26	1.34	0.24	2.68	0.39	1.38	0.04	1.63	3.15 lbf (14 N)	7.87 lbf (35 N)
0.79	1.18	0.39	1.89	0.35	4.02	0.59	2.13	0.06	2.36	4.95 lbf (22 N)	15.74 lbf (70 N)

3D Product Configurator

Selected Part

Part Number

Total Canadian Dollars (net)

Can$29.37

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$29.37
50	99	Can$26.92
100	249	Can$24.48
≥ 250		Can$22.03

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.330 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

GN 724.4 Indexing Plungers Steel / Stainless Steel, with Chamfered Pin, Weldable

Photo

Product Family Stainless Steel

Product description

Information

Specification

Technical drawing

Part Options / Table

Type

Type: C1 - Chamfer, top

Type: C2 - Chamfer, bottom

Type: C3 - Chamfer, right

Type: C4 - Chamfer, left

Type: CU - Unassembled

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

C1	Chamfer, top
C2	Chamfer, bottom
C3	Chamfer, right
C4	Chamfer, left
CU	Unassembled