Indexing Plungers GN 722.4

Product description

Information

With indexing plungers GN 722.4 , the plunger pin is actuated via the pull ring. This is done either manually, with a cable or by means of an extended pull rod with hook. The ST version is designed for applications in steel construction.

The types with lock-out are used when the plunger pin should temporarily not protrude. For this purpose, the pull ring is turned sideways after the locking pin has been retracted. The ring is held in this position by the catch recess at the top of the guide.

The dimensional tolerances between plunger pin and guide are selected so that the functional reliability is guaranteed even after welding, applying a corrosion protection layer, or in case of contamination.

The unassembled types CU / TU are recommended to avoid changing the microstructure of the spring and plunger during the welding process. After welding, the indexing plunger is then assembled.

Specification

Guide
Steel precision castingST
- Weldable
- Blackened finish

Pull ring
Steel precision casting
Zinc plated, blue passivated finish

Plunger pin
Steel, zinc plated, blue passivated finish

Countersunk screw
Steel, zinc plated

Spring
Stainless steel AISI 316Ti

RoHS

Build & Price

Part Number T - Round, with pull ring, fixed (riveted)	Part Number TU - Round, with pull ring, unassembled	Part Number C - Square, with pull ring, fixed (riveted)	Part Number CU - Square, with pull ring, unassembled	d₁ Type C / CU Pin -0.002 / -0.01 Bore +0.004 / +0.012	d₁ Type T / TU Pin -0.002 / -0.01 Bore +0.008 /+0.016	d₂ Type T / TU	s Type C / CU	d₃	d₄	l₁ ≈	l₂	l₃	l₄	l₅	A/F in mm	Spring load ≈ Initial	End


722.4-8-20-T-ST	722.4-8-20-TU-ST			0.315 -0.002 / -0.01 / +0.004 / +0.012	0.315 -0.002 / -0.01 / +0.008 /+0.016	0.79	-	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
		722.4-8-20-C-ST	722.4-8-20-CU-ST	0.315 -0.002 / -0.01 / +0.004 / +0.012	-	-	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
722.4-10-20-T-ST	722.4-10-20-TU-ST			0.394 -0.002 / -0.01 / +0.004 / +0.012	0.394 -0.002 / -0.01 / +0.008 /+0.016	0.79	-	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
		722.4-10-20-C-ST	722.4-10-20-CU-ST	0.394 -0.002 / -0.01 / +0.004 / +0.012	-	-	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
722.4-12-20-T-ST	722.4-12-20-TU-ST			0.472 -0.002 / -0.01 / +0.004 / +0.012	0.472 -0.002 / -0.01 / +0.008 /+0.016	0.79	-	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
		722.4-12-20-C-ST	722.4-12-20-CU-ST	0.472 -0.002 / -0.01 / +0.004 / +0.012	-	-	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
722.4-14-20-T-ST	722.4-14-20-TU-ST			0.551 -0.002 / -0.01 / +0.004 / +0.012	0.551 -0.002 / -0.01 / +0.008 /+0.016	0.79	-	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
		722.4-14-20-C-ST	722.4-14-20-CU-ST	0.551 -0.002 / -0.01 / +0.004 / +0.012	-	-	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
722.4-16-30-T-ST	722.4-16-30-TU-ST			0.630 -0.002 / -0.01 / +0.004 / +0.012	0.630 -0.002 / -0.01 / +0.008 /+0.016	1.18	-	1.89	0.35	4.02	0.79	2.13	3.07	2.36	4	4.95 lbf (22 N)	15.74 lbf (70 N)
		722.4-16-30-C-ST	722.4-16-30-CU-ST	0.630 -0.002 / -0.01 / +0.004 / +0.012	-	-	1.18	1.89	0.35	4.02	0.79	2.13	3.07	2.36	4	4.95 lbf (22 N)	15.74 lbf (70 N)
722.4-20-30-T-ST	722.4-20-30-TU-ST			0.787 -0.002 / -0.01 / +0.004 / +0.012	0.787 -0.002 / -0.01 / +0.008 /+0.016	1.18	-	1.89	0.35	4.02	0.79	2.13	3.07	2.36	4	4.95 lbf (22 N)	15.74 lbf (70 N)
		722.4-20-30-C-ST	722.4-20-30-CU-ST	0.787 -0.002 / -0.01 / +0.004 / +0.012	-	-	1.18	1.89	0.35	4.02	0.79	2.13	3.07	2.36	4	4.95 lbf (22 N)	15.74 lbf (70 N)

d₁ Type C / CU Pin -0.002 / -0.01 Bore +0.004 / +0.012	d₁ Type T / TU Pin -0.002 / -0.01 Bore +0.008 /+0.016	d₂ Type T / TU	s Type C / CU	d₃	d₄	l₁ ≈	l₂	l₃	l₄	l₅	A/F in mm	Spring load ≈ Initial	End

0.315	0.315	0.79	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
0.394	0.394	0.79	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
0.472	0.472	0.79	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
0.551	0.551	0.79	0.79	1.34	0.24	2.67	0.55	1.38	2.00	1.63	2.5	3.15 lbf (14 N)	7.87 lbf (35 N)
0.630	0.630	1.18	1.18	1.89	0.35	4.02	0.79	2.13	3.07	2.36	4	4.95 lbf (22 N)	15.74 lbf (70 N)
0.787	0.787	1.18	1.18	1.89	0.35	4.02	0.79	2.13	3.07	2.36	4	4.95 lbf (22 N)	15.74 lbf (70 N)

3D Product Configurator

Selected Part

Part Number

Total Canadian Dollars (net)

Can$23.01

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$23.01
50	99	Can$21.09
100	249	Can$19.17
≥ 250		Can$17.26

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.324 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.

CAD Download

Other Data Formats

About CAD Downloads

Save as Favorites

GN 722.4 Indexing Plungers Steel, Lock-Out, Weldable, with Pull Ring

Photo

Product description

Information

Specification

Technical drawing

Part Options / Table

Type

Metric

Build & Price

Selected Part

CAD Download

CAD data

Login

Email CAD File

Need Help?

This could also be interesting...

C	Square, with pull ring, fixed (riveted)
CU	Square, with pull ring, unassembled
T	Round, with pull ring, fixed (riveted)
TU	Round, with pull ring, unassembled