Indexing Plunger Latch Mechanisms GN 417

Photo

Type: C - Lock-out, with knob

GN 417 Zinc Die-Cast Indexing Plunger Latch Mechanisms, Lock-Out and Non Lock-Out, with Knob Type: B - Non lock-out, with knob

Accessories for Profile Systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Winco standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

compatible with the common profile systems
for groove widths of 6, 8 and 10 mm
for profiles 30, 40 and 45 mm

Show All Compatible Products

Standard Sheet GN 417 Print This Page List of Indexing Plunger Types Load Rating Information ISO Fundamental Tolerances Stainless Steel Characteristics Plastic Characteristics

Product description

Information

Indexing plunger latch mechanisms GN 417 with flange are mounted parallel to the plunger pin and are therefore characterized by an especially low height. The mounting hole pattern with slotted holes offers additional mounting options, such as for the use of aluminum profiles. The use of washers makes it easier to mount the parts using the slotted holes.

Indexing plunger latch mechanisms with lock-out (type C) are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.

The fastening range is designed so that washers ISO 7092 can be used.

In addition to using metric fasteners for mounting:

where b₄ = 3.3 mm, #4-40 socket cap screws can be used
where b₄ = 4.3 mm, #6-32 socket cap screws can be used
where b₄ = 5.4 mm, #10-24 socket cap screws can be used

Specification

Housing
Zinc die-cast
Powder coated
Black, textured finish

Plunger pin
Stainless steel AISI 303

Spring
Stainless steel AISI 301

Knob
Plastic
Technopolymer (Polyamide PA)

Temperature resistant up to 230 °F (110 °C)
Black, matte finish
Not removable

RoHS

Accessory

Locators GN 417.1

Build & Price

Part Number	d₁ Pin -0.004 Bore +0.001 / +0.003	b₁	b₂ Type B	Type C	b₃	b₄ -0.008	d₂	h₁	h₂	h₃	k₁ ±0.002	k₂	k₃	k₄ Type B	Type C	l₁	l₂	Spring load ≈ Initial	End

417-4-B	0.157 -0.004 / +0.001 / +0.003	0.87	0.65	0.75	0.24	0.130 -0.008	0.47	0.28	0.16	0.39	0.551 ±0.002	0.16	0.31	0.18	0.28	0.16	0.41	0.67 lbf (3 N)	2.70 lbf (12 N)
417-5-B	0.197 -0.004 / +0.001 / +0.003	1.10	0.87	1.00	0.31	0.169 -0.008	0.63	0.37	0.18	0.53	0.709 ±0.002	0.20	0.39	0.28	0.41	0.20	0.51	1.12 lbf (5 N)	5.40 lbf (24 N)
417-6-B	0.236 -0.004 / +0.001 / +0.003	1.26	1.08	1.20	0.39	0.213 -0.008	0.71	0.41	0.20	0.61	0.827 ±0.002	0.22	0.47	0.39	0.51	0.24	0.61	1.12 lbf (5 N)	4.72 lbf (21 N)
417-8-B	0.315 -0.004 / +0.001 / +0.003	1.34	1.30	1.48	0.47	0.213 -0.008	0.83	0.49	0.24	0.73	0.906 ±0.002	0.22	0.47	0.61	0.79	0.31	0.71	1.35 lbf (6 N)	4.95 lbf (22 N)
417-10-B	0.394 -0.004 / +0.001 / +0.003	1.54	1.38	1.57	0.57	0.256 -0.008	0.98	0.57	0.24	0.86	1.063 ±0.002	0.24	0.59	0.53	0.73	0.39	0.89	0.90 lbf (4 N)	5.62 lbf (25 N)

Part Number	d₁ Pin -0.004 Bore +0.001 / +0.003	b₁	b₂ Type B	Type C	b₃	b₄ -0.008	d₂	h₁	h₂	h₃	k₁ ±0.002	k₂	k₃	k₄ Type B	Type C	l₁	l₂	Spring load ≈ Initial	End

417-4-C	0.157 -0.004 / +0.001 / +0.003	0.87	0.65	0.75	0.24	0.130 -0.008	0.47	0.28	0.16	0.39	0.551 ±0.002	0.16	0.31	0.18	0.28	0.16	0.41	0.67 lbf (3 N)	2.70 lbf (12 N)
417-5-C	0.197 -0.004 / +0.001 / +0.003	1.10	0.87	1.00	0.31	0.169 -0.008	0.63	0.37	0.18	0.53	0.709 ±0.002	0.20	0.39	0.28	0.41	0.20	0.51	1.12 lbf (5 N)	5.40 lbf (24 N)
417-6-C	0.236 -0.004 / +0.001 / +0.003	1.26	1.08	1.20	0.39	0.213 -0.008	0.71	0.41	0.20	0.61	0.827 ±0.002	0.22	0.47	0.39	0.51	0.24	0.61	1.12 lbf (5 N)	4.72 lbf (21 N)
417-8-C	0.315 -0.004 / +0.001 / +0.003	1.34	1.30	1.48	0.47	0.213 -0.008	0.83	0.49	0.24	0.73	0.906 ±0.002	0.22	0.47	0.61	0.79	0.31	0.71	1.35 lbf (6 N)	4.95 lbf (22 N)
417-10-C	0.394 -0.004 / +0.001 / +0.003	1.54	1.38	1.57	0.57	0.256 -0.008	0.98	0.57	0.24	0.86	1.063 ±0.002	0.24	0.59	0.53	0.73	0.39	0.89	0.90 lbf (4 N)	5.62 lbf (25 N)

d₁ Pin -0.004 Bore +0.001 / +0.003	b₁	b₂ Type B	Type C	b₃	b₄ -0.008	d₂	h₁	h₂	h₃	k₁ ±0.002	k₂	k₃	k₄ Type B	Type C	l₁	l₂	Spring load ≈ Initial	End

0.157	0.87	0.65	0.75	0.24	0.130	0.47	0.28	0.16	0.39	0.551	0.16	0.31	0.18	0.28	0.16	0.41	0.67 lbf (3 N)	2.70 lbf (12 N)
0.197	1.10	0.87	1.00	0.31	0.169	0.63	0.37	0.18	0.53	0.709	0.20	0.39	0.28	0.41	0.20	0.51	1.12 lbf (5 N)	5.40 lbf (24 N)
0.236	1.26	1.08	1.20	0.39	0.213	0.71	0.41	0.20	0.61	0.827	0.22	0.47	0.39	0.51	0.24	0.61	1.12 lbf (5 N)	4.72 lbf (21 N)
0.315	1.34	1.30	1.48	0.47	0.213	0.83	0.49	0.24	0.73	0.906	0.22	0.47	0.61	0.79	0.31	0.71	1.35 lbf (6 N)	4.95 lbf (22 N)
0.394	1.54	1.38	1.57	0.57	0.256	0.98	0.57	0.24	0.86	1.063	0.24	0.59	0.53	0.73	0.39	0.89	0.90 lbf (4 N)	5.62 lbf (25 N)

3D Product Configurator

Type

B - Non lock-out, with knob

C - Lock-out, with knob

Selected Part

Part Number

Total Canadian Dollars (net)

Can$11.61

In Stock: 4

In Stock

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	99	Can$11.61
100	249	Can$10.65
250	499	Can$9.68
≥ 500		Can$8.71

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.022 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.