GN 928 Shaft Clamping Units Stainless Steel, for Round Shafts or Tubes

GN 928 Stainless Steel Shaft Clamping Units, for Round Shafts or Tubes

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard Sheet GN 928 Print This Page ISO Fundamental Tolerances Stainless Steel Characteristics

Product description

With the stainless steel shaft clamping unit GN 928, round workpieces from 6 to 125 mm can be rapidly, accurately and economically clamped.

The threaded hole d₅ can be used for attaching a jig or fixture or a fixing screw for holding the clamping unit in an axial position during an assembly operation.

Specification

Body
Stainless steelNI AISI 303

Socket cap screw DIN 912
Stainless steel

RoHS

Accessory

Assembly Tools GN 928.1 (Part number, see table above)

GN 928 Stainless Steel Shaft Clamping Units, for Round Shafts or Tubes sketch

Hide technical drawing

Part Options / Table

Part Number	d₁ -0.004	d₂	d₃ Round workpiece in mm	d₄ +0.001	d₅	e +0.008 in mm	l₁ max.	l₂	l₃	A/F Internal hex in mm	Max. tightening torque in Nm	Part numbers Assembly tool

928-8-NI	0.315 -0.004	M 4	6 - 10	0.315 +0.001	M 2.5	d₃ / 2 + 2.8 +0.008	1.06	0.31	0.16	3	2.9	928.1-3
928-10-NI	0.394 -0.004	M 5	10 - 15	0.394 +0.001	M 3	d₃ / 2 + 3.3 +0.008	1.30	0.39	0.20	4	6	928.1-4
928-12-NI	0.472 -0.004	M 6	15 - 20	0.472 +0.001	M 4	d₃ / 2 + 3.5 +0.008	1.54	0.47	0.24	5	10	928.1-5
928-16-NI	0.630 -0.004	M 8	20 - 30	0.630 +0.001	M 5	d₃ / 2 + 4 +0.008	1.81	0.63	0.31	6	25	928.1-6
928-20-NI	0.787 -0.004	M 10	30 - 40	0.787 +0.001	M 6	d₃ / 2 + 4.8 +0.008	2.09	0.79	0.39	8	46	928.1-8
928-25-NI	0.984 -0.004	M 12	40 - 60	0.984 +0.001	M 8	d₃ / 2 + 5.6 +0.008	2.76	0.98	0.47	10	82	928.1-10
928-30-NI	1.181 -0.004	M 16	60 - 125	1.181 +0.001	M 10	d₃ / 2 + 7.9 +0.008	3.19	1.18	0.63	14	206	928.1-14

Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)

d₁ -0.004	d₂	d₃ Round workpiece in mm	d₄ +0.001	d₅	e +0.008 in mm	l₁ max.	l₂	l₃	A/F Internal hex in mm	Max. tightening torque in Nm	Part numbers Assembly tool

0.315	M 4	6 - 10	0.315	M 2.5	d₃ / 2 + 2.8	1.06	0.31	0.16	3	2.9	928.1-3
0.394	M 5	10 - 15	0.394	M 3	d₃ / 2 + 3.3	1.30	0.39	0.20	4	6	928.1-4
0.472	M 6	15 - 20	0.472	M 4	d₃ / 2 + 3.5	1.54	0.47	0.24	5	10	928.1-5
0.630	M 8	20 - 30	0.630	M 5	d₃ / 2 + 4	1.81	0.63	0.31	6	25	928.1-6
0.787	M 10	30 - 40	0.787	M 6	d₃ / 2 + 4.8	2.09	0.79	0.39	8	46	928.1-8
0.984	M 12	40 - 60	0.984	M 8	d₃ / 2 + 5.6	2.76	0.98	0.47	10	82	928.1-10
1.181	M 16	60 - 125	1.181	M 10	d₃ / 2 + 7.9	3.19	1.18	0.63	14	206	928.1-14

Build & Price

Selected Part

Part Number

Total (net)

Can$57.20

Available within 1-2 weeks

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	49	Can$57.20
50	99	Can$52.44
100	249	Can$47.67
≥ 250		Can$42.90

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.015 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.