Seven-Lobed Knobs EN 636

Photo

EN 636 Technopolymer Plastic Seven-Lobed Knobs, with Tapped or Plain Bore Insert, Ergostyle® Type: E - With tapped blind bore
Color: DSG - Black-gray, RAL 7021, matte finish

ELESA original design
code: ELK. / ELK-FP

Type: E - With tapped blind bore
Color: DSG - Black-gray, RAL 7021, matte finish

EN 636 Technopolymer Plastic Seven-Lobed Knobs, with Tapped or Plain Bore Insert, Ergostyle® Type: B - With plain through bore, tol H7
Color: DGR - Gray, RAL 7035, matte finish

EN 636 Technopolymer Plastic Seven-Lobed Knobs, with Tapped or Plain Bore Insert, Ergostyle® Type: B - With plain through bore, tol H7
Color: DSG - Black-gray, RAL 7021, matte finish

EN 636 Technopolymer Plastic Seven-Lobed Knobs, with Tapped or Plain Bore Insert, Ergostyle® Type: C - With plain blind bore, tol. H9
Color: DGN - Green, RAL 6017, matte finish

EN 636 Technopolymer Plastic Seven-Lobed Knobs, with Tapped or Plain Bore Insert, Ergostyle® Type: E - With tapped blind bore
Color: DGB - Yellow, RAL 1021, matte finish

EN 636 Technopolymer Plastic Seven-Lobed Knobs, with Tapped or Plain Bore Insert, Ergostyle® Type: E - With tapped blind bore
Color: DGR - Gray, RAL 7035, matte finish

Product Family Ergostyle

Ergostyle standard parts combine functional and ergonomic operation with attractive appearance. Numerous design awards are proof of the high quality claim. The hallmark of Ergostyle products are five small dots.

functional, ergonomic design
ultimate design quality (numerous design awards)

Show all Ergostyle products

Product description

Information

The operator's palm rests on the slightly concave front surface of the seven-lobed knobs EN 636, while the fingers are offered a natural ergonomic position inside the rear lobes of the knob. In this position, the operator can apply maximum torque with minimum force.

Resistant to solvents, oils, grease and other chemical agents.

Specification

Seven-lobed knob
Plastic
Technopolymer (Polyamide PA)

Glass fiber reinforced
Temperature resistant up to 266 °F (130 °C)
Black-gray, matte finish,
similar to RAL 7021

Color of the upper part
Black-gray, RAL 7021, matte finishDSG DSG
Orange, RAL 2004, matte finishDOR DOR
Gray, RAL 7035, matte finishDGR DGR
Yellow, RAL 1021, matte finishDGB DGB
Blue, RAL 5024, matte finishDBL DBL
Red, RAL 3000, matte finishDRT DRT
Green, RAL 6017, matte finishDGN DGN

Lobed knob upper part is ultrasonically welded to lower part

Tapped insert
Type B / C: Steel, blackened finish
Type E: Brass

RoHS

On request

Special inch and metric size plain through bores

Build & Price

Part Number	d₁	d₂ Thread Type E	d₃ H9 Blind bore Type C	d₄ H7 Through bore Type B	d₅	d₆	d₇	h₁	h₂	Length l	t₁ min.	t₂ min.

636-56-B5/16-C-DSG	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B5/16-C-DOR	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B5/16-C-DGR	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B5/16-C-DGB	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B5/16-C-DBL	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B5/16-C-DRT	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B5/16-C-DGN	2.20	-	B 5/16 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-70-B3/8-C-DSG	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B3/8-C-DOR	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B3/8-C-DGR	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B3/8-C-DGB	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B3/8-C-DBL	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B3/8-C-DRT	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B3/8-C-DGN	2.76	-	B 3/8 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-45-B8-C-DSG	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-B8-C-DOR	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-B8-C-DGR	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-B8-C-DGB	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-B8-C-DBL	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-B8-C-DRT	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-B8-C-DGN	1.77	-	B 8 H9	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-56-B8-C-DSG	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B8-C-DOR	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B8-C-DGR	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B8-C-DGB	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B8-C-DBL	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B8-C-DRT	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B8-C-DGN	2.20	-	B 8 H9	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-70-B10-C-DSG	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B10-C-DOR	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B10-C-DGR	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B10-C-DGB	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B10-C-DBL	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B10-C-DRT	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B10-C-DGN	2.76	-	B 10 H9	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83

Part Number	d₁	d₂ Thread Type E	d₃ H9 Blind bore Type C	d₄ H7 Through bore Type B	d₅	d₆	d₇	h₁	h₂	Length l	t₁ min.	t₂ min.

636-56-5/16X18-E-DSG	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-5/16X18-E-DOR	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-5/16X18-E-DGR	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-5/16X18-E-DGB	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-5/16X18-E-DBL	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-5/16X18-E-DRT	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-5/16X18-E-DGN	2.20	5/16 x 18	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-70-3/8X16-E-DSG	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-3/8X16-E-DOR	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-3/8X16-E-DGR	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-3/8X16-E-DGB	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-3/8X16-E-DBL	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-3/8X16-E-DRT	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-3/8X16-E-DGN	2.76	3/8 x 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-45-M6-E-DSG	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M6-E-DOR	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M6-E-DGR	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M6-E-DGB	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M6-E-DBL	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M6-E-DRT	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M6-E-DGN	1.77	M 6	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DSG	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DOR	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DGR	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DGB	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DBL	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DRT	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-45-M8-E-DGN	1.77	M 8	-	-	-	-	0.83	1.02	0.39	-	0.47	0.55
636-56-M8-E-DSG	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M8-E-DOR	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M8-E-DGR	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M8-E-DGB	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M8-E-DBL	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M8-E-DRT	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M8-E-DGN	2.20	M 8	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DSG	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DOR	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DGR	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DGB	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DBL	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DRT	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M10-E-DGN	2.20	M 10	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DSG	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DOR	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DGR	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DGB	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DBL	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DRT	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-M12-E-DGN	2.20	M 12	-	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-70-M10-E-DSG	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M10-E-DOR	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M10-E-DGR	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M10-E-DGB	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M10-E-DBL	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M10-E-DRT	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M10-E-DGN	2.76	M 10	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DSG	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DOR	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DGR	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DGB	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DBL	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DRT	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M12-E-DGN	2.76	M 12	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DSG	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DOR	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DGR	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DGB	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DBL	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DRT	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-M16-E-DGN	2.76	M 16	-	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83

Part Number	d₁	d₂ Thread Type E	d₃ H9 Blind bore Type C	d₄ H7 Through bore Type B	d₅	d₆	d₇	h₁	h₂	Length l	t₁ min.	t₂ min.

636-56-B10-B-DSG	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B10-B-DOR	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B10-B-DGR	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B10-B-DGB	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B10-B-DBL	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B10-B-DRT	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-56-B10-B-DGN	2.20	-	-	B 10 H7	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
636-70-B12-B-DSG	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B12-B-DOR	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B12-B-DGR	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B12-B-DGB	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B12-B-DBL	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B12-B-DRT	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83
636-70-B12-B-DGN	2.76	-	-	B 12 H7	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83

d₁	d₂ Thread Type E	d₃ H9 Blind bore Type C	d₄ H7 Through bore Type B	d₅	d₆	d₇	h₁	h₂	Length l	t₁ min.	t₂ min.

2.20	5/16 x 18	B 5/16	-	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
2.76	3/8 x 16	B 3/8	-	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83

d₁	d₂ Thread Type E	d₃ H9 Blind bore Type C	d₄ H7 Through bore Type B	d₅	d₆	d₇	h₁	h₂	Length l	t₁ min.	t₂ min.

1.77	M 6	M 8	-	B 8	-	-	-	0.83	1.02	0.39	-	0.47	0.55
2.20	M 8	M 10	M 12	B 8	B 10	0.87	0.91	1.04	1.14	0.43	0.87	0.51	0.55
2.76	M 10	M 12	M 16	B 10	B 12	1.02	1.10	1.28	1.38	0.51	1.06	0.67	0.83

3D Product Configurator

Selected Part

Part Number

Total Canadian Dollars (net)

Can$13.11

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	9	Can$13.11
10	249	Can$12.63
250	499	Can$11.92
≥ 500		Can$10.73

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.092 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.