Multi-Lobed Handwheels EN 577.9

Product description

Information

These multi-lobed handwheels EN 577.9 have a recess in the hub to accept EN 000.9 or EN 000.13 position indicators.

The screw is screwed into the pallet pin and secured into position with the hex lock nut. The pallet depth can still be adjusted to a certain extent.

Resistant to solvents, oil, greases and other chemical agents.

If application requires occasional removal of position indicator, handwheel may be ordered upon request with a cover cap to shroud the empty recess.

Specification

Handwheel body
Plastic, Polyamide (PA)
- Glass fiber reinforced
- Temperature resistant up to 212 °F (100 °C)
- Black, matte finish

Bushing and pallet pin
Steel, blackened finish

Screw for pallet pin injected

Set screw DIN 916
With internal hex and serrated point

RoHS

Accessory

Position Indicators EN 000.9
Position Indicators EN 000.13

Build & Price

Part Number	d₁	d₂ H7 Bore	d₃	d₄	d₅ -0.004	a	b	l₁	l₂	l₃	l₄	l₅	For position indicators EN 000.9 Size	EN 000.13 Size

577.9-85-B10	3.35	B 10 H7	0.71	2.28	0.236 -0.004	0.75	0.73	0.81	2.17	0.20	0.41	0.57	1.65	-
577.9-110-B12	4.33	B 12 H7	1.18	3.03	0.236 -0.004	1.12	0.79	0.87	2.28	0.24	0.47	0.51	2.36	2.36

d₁	d₂ H7 Bore	d₃	d₄	d₅ -0.004	a	b	l₁	l₂	l₃	l₄	l₅	For position indicators EN 000.9 Size	EN 000.13 Size

3.35	B 10	0.71	2.28	0.236	0.75	0.73	0.81	2.17	0.20	0.41	0.57	1.65	-
4.33	B 12	1.18	3.03	0.236	1.12	0.79	0.87	2.28	0.24	0.47	0.51	2.36	2.36

3D Product Configurator

Outside diameter d₁

3.35

4.33

Bore d₂

B 10

B 12

Installation Instructions

Turn spindle into the starting position (0 position).
Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel.
Move the position indicator to the 0 position by turning the outer gear wheel.
Hold the (unmounted) handwheel such that the hole for the gear pinion is in the “12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body.
Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step. Secure the position indicator with the set screw, avoiding excessive tightening torque to prevent the housing from deforming.
Place the handwheel onto the spindle and fix in place with the set screw.

7.Check by turning the handwheel to ensure that the starting position of the spindle and the 0 position of both pointers coincide.

If necessary, take out and readjust the position indicator.

Selected Part

Part Number

Total Canadian Dollars (net)

Can$54.31

Call / Email for Delivery Time

Quantity

Please note our quantity discounts (Canadian Dollars).

Min	Max	Price
1	6	Can$54.31
7	99	Can$52.34
100	249	Can$49.37
≥ 250		Can$44.44

Prop 65: Not compliant

WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov

RoHS: Compliant

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

Weight: 0.286 lbs

If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993

All Prices are in Canadian Dollars. Taxes Not Included.