Cart

The cart is empty.

Country
Show all

GN 950.1 Spoked Handwheels with Large Hub Cast Iron, with or without Revolving Handle

GN 950.1 Cast Iron Spoked Handwheels with Large Hub, with or without Revolving Handle Bore code: B - Without keyway Type: D - With revolving handle
Bore code: B - Without keyway
Type: D - With revolving handle
Standard Sheet GN 950.1 Print This Page Keyways WN 6885 / DIN 6885-1 Cross Holes GN 110 ISO Fundamental Tolerances

Product description

Spoked handwheels GN 950.1 are available in type D with fixed or revolving handle.

Spoked handwheels GN 950.1 have extended hubs with larger diameters, allowing for larger bores and an increased distance between the wheel rim and the fastening surface.

Specification

Cast ironGG

  • Contact face of hub machined
  • Rim turned and highly polished finish
    Radial and axial runout of the rim < 0.4 mm
  • Handles DIN 39 / DIN 98
    Steel, zinc plated, blue passivated finish

RoHS

Accessory

Countersunk Washers GN 184 (for Axial Fixing)

On request

  • Other modifications such as special inch and metric bores, set screw holes, etc.
GN 950.1 Cast Iron Spoked Handwheels with Large Hub, with or without Revolving Handle sketch
Hide technical drawing
GN 950.1 Cast Iron Spoked Handwheels with Large Hub, with or without Revolving Handle sketch

Part Options / Table

Bore code

BWithout keyway
KWith keyway

Type

AWithout handle
DWith revolving handle
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
d1d2 H7
Bore		bd3 ≈d4l1l2 ≈l3 ≈rØ
Handle		No. of
spokes
4.92140.631.34M 81.021.772.561.850.793
6.30160.711.77M 101.262.053.152.440.983
7.87200.871.97M 101.502.323.153.150.983
9.84241.022.20M 121.732.604.023.981.265

Build & Price
Material

Handwheel diameter d1
Bore code


Bore diameter d2
Type


Material

Handwheel diameter d1
Bore code


Bore diameter d2
Type


GN 110 Cross Holes (Special Order) - Metric
f8ca6d28-dd73-48fa-98c4-bb48305c7686
Show / Hide columns
d1 / sd1 / sd2 H11d3
Thread		Length l
Standard version		Length l
Handwheels DIN 950 / GN 949 up
to Ø 250 mm
672.5M 34.5-
893M 55.54.5
10113M 55.54.5
12134M 66.55.5
14154M 66.55.5
16175M 687
18195M 687
20215M 687
22236M 6109
24256M 6109
26276M 6109

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

GN 110 Cross Holes (Special Order) - Inch
f8ca6d28-dd73-48fa-98c4-bb48305c7686
Show / Hide columns
d1 / sd2 H11d3
Thread		Length l
1/43/326x320.188
5/161/810x320.2
3/81/810x320.2
1/25/321/4x200.25
9/165/321/4x200.25
5/83/161/4x200.312
11/163/161/4x200.312
3/43/161/4x200.312
13/161/41/4x200.375
11/45/16x180.375
1 1/161/45/16x180.375
1 1/181/45/16x180.375
1 1/141/45/16x180.375

The connection between the operating element and the shaft is often made by a cross pin or a grub screw. As a result, the user is faced with relatively high assembly costs since cross holes on operating elements are usually not readily available. Components with cross holes according to GN 110 are not only manufactured and supplied at very competitive prices but there is also no need for time-consuming design drawings. However, the geometrical shape of some operating elements does not allow the use of this standard. The d2 pin hole is intended for use with a spring pin.

To order cross hole GN 110, please call our sales team:
USA: +1-800-877-8351
Mexico: +52(81)2721-4021
Canada: +1-800-397-6993

Selected Part

Total (net)
Can$90.77
Available within 1-2 weeks
Please note our quantity discounts (Canadian Dollars).
MinMaxPrice
149Can$90.77
5099Can$83.21
100249Can$75.64
≥ 250Can$68.08
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 1.953 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993
All Prices are in Canadian Dollars. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites
Recommend a product

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993

Special Requests | Contact our sales team

GN 950.1-GG-125-B14-AGN 950.1-GG-125-K14-AGN 950.1-GG-125-B14-DGN 950.1-GG-125-K14-DGN 950.1-GG-160-B16-AGN 950.1-GG-160-K16-AGN 950.1-GG-160-B16-DGN 950.1-GG-160-K16-DGN 950.1-GG-200-B20-AGN 950.1-GG-200-K20-AGN 950.1-GG-200-B20-DGN 950.1-GG-200-K20-DGN 950.1-GG-250-B24-AGN 950.1-GG-250-K24-AGN 950.1-GG-250-B24-DGN 950.1-GG-250-K24-D

This could also be interesting...

Cast Iron / Aluminum, Spoked Handwheels, with or without Handle
DIN 950 Spoked Handwheels, Cast Iron / Aluminum, with or without Handle
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

+1-800-397-6993 sales@jwwinco.ca
Request Callback

Important: Price Adjustment Announcement

Attention Valued Customer,

Beginning April 14, 2025, we will implement a price adjustment. Some items will have a price decrease, while others will increase. The adjustment helps ensure our commitment to providing our customers with the best products and services.

We will honor current published prices through April 13, 2025.

Customers with pricing agreements will not be effected until annual pricing is reviewed.

 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
J.W. Winco, Inc.
Go to
www.jwwinco.com
An error has occurred!
We have received your callback request and will contact you soon.