Edge handles GN 481 are particularly compact and are used, for example, on the side of monitor housings as a handling aid or generally to protect the edges of housings.
Tolerance compensation of 1 mm per end cap simplifies installation. The two end caps are mounted to the handle profile with self-tapping countersunk screws so they can be screwed back on after adjusting the length of the handle without requiring readjustment. This allows the length of the housing to be adapted to any desired size.
Tube
Aluminum
End pieces
Zinc die-cast
Powder coated
Black, RAL 9005, textured finish
Countersunk screws
Steel
RoHS
| d1 -0.02 | l1 | a1 | a2 | d2 | h1 | h2 -0.004 | l2 |
|---|---|---|---|---|---|---|---|
| 1.18 | 3.94 | 0.71 | 0.35 | 1.26 | 1.36 | 0.571 | 4.17 |
| 1.18 | 7.87 | 0.71 | 0.35 | 1.26 | 1.36 | 0.571 | 8.11 |
| 1.18 | 11.81 | 0.71 | 0.35 | 1.26 | 1.36 | 0.571 | 12.05 |
| 1.18 | 15.75 | 0.71 | 0.35 | 1.26 | 1.36 | 0.571 | 15.98 |
| 1.18 | 19.69 | 0.71 | 0.35 | 1.26 | 1.36 | 0.571 | 19.92 |
|
In order to align the edge handle with theedge of the cabinet (tolerance l1 + 2 mm), the end caps should, to start with, only be loosely fitted. The mounting is carried out in two steps as follows:
|
||||||||||
| Min | Max | Price |
|---|---|---|
| 1 | 99 | Can$23.11 |
| 100 | 249 | Can$21.19 |
| 250 | 499 | Can$19.26 |
| ≥ 500 | Can$17.34 |
Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993
