Country
Cart

The cart is empty.

Show all

Search result: Sauterelles de serrage pneumatiques (limited to 100 hits from a total of 981)

Filter Products
New Products
System of Measurement

Remove filters
EN 6475.1 Plastic Side Guides, Guide Contour Rounded

EN 6475.1

Plastic Side Guides, Guide Contour Rounded
EN 6472 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides Type: K - Ball-shaped rollers<br />Identification no.: 1 - Single row EN 6472 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides Type: K - Ball-shaped rollers<br />Identification no.: 2 - Double row EN 6472 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides Type: Z - Cylindrical rollers<br />Identification no.: 1 - Single row EN 6472 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides Type: Z - Cylindrical rollers<br />Identification no.: 2 - Double row EN 6472 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides Type: ZA - Cylindrically offset rollers<br />Identification no.: 1 - Single row EN 6472 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides Type: ZA - Cylindrically offset rollers<br />Identification no.: 2 - Double row

EN 6472

Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on Two Sides
GN 732.1 Steel Cylinder Head Shoulder Bolts

GN 732.1

Steel Cylinder Head Shoulder Bolts
GN 732.1 Stainless Steel Cylinder Head Shoulder Bolts

GN 732.1

Stainless Steel Cylinder Head Shoulder Bolts
EN 6471 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side Type: ZA - Cylindrically offset rollers<br />Identification no.: 1 - Single row EN 6471 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side Type: K - Ball-shaped rollers<br />Identification no.: 1 - Single row EN 6471 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side Type: K - Ball-shaped rollers<br />Identification no.: 2 - Double row EN 6471 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side Type: Z - Cylindrical rollers<br />Identification no.: 1 - Single row EN 6471 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side Type: Z - Cylindrical rollers<br />Identification no.: 2 - Double row EN 6471 Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side Type: ZA - Cylindrically offset rollers<br />Identification no.: 2 - Double row

EN 6471

Plastic Side Guides, Aluminum Carrier Profile, Cylinder and Ball Rollers on One Side
EN 6475 Plastic Side Guides, Guide Contour Flat Bildvariante: 12<br />Material: PE - Polyethylene EN 6475 Plastic Side Guides, Guide Contour Flat Bildvariante: 12<br />Material: HT - Polytetrafluorethylene EN 6475 Plastic Side Guides, Guide Contour Flat Bildvariante: 32<br />Material: PE - Polyethylene

EN 6475

Plastic Side Guides, Guide Contour Flat
EN 6475.2 Plastic Side Guides, Guide Contour Flat, Stepped

EN 6475.2

Plastic Side Guides, Guide Contour Flat, Stepped
EN 6471.1 Plastic Lead-In Guides, for One-Sided Side Guides EN 6471 Identification no.: 1 - Single row EN 6471.1 Plastic Lead-In Guides, for One-Sided Side Guides EN 6471 Identification no.: 2 - Double row

EN 6471.1

Plastic Lead-In Guides, for One-Sided Side Guides EN 6471
EN 6472.1 Plastic Lead-In Guides, for Two-Sided Side Guides EN 6472 Identification no.: 1 - Single row EN 6472.1 Plastic Lead-In Guides, for Two-Sided Side Guides EN 6472 Identification no.: 2 - Double row

EN 6472.1

Plastic Lead-In Guides, for Two-Sided Side Guides EN 6472
IIG Inch Size, Steel &quot;Glide-Rite&quot;™ Industrial Glides, Fixed Threaded Stud Type, with Plastic Pad

IIG

Inch Size, Steel "Glide-Rite"™ Industrial Glides, Fixed Threaded Stud Type, with Plastic Pad
IIG-EL Inch Size, Steel &quot;Glide-Rite&quot;™ Industrial Glides, Fixed Threaded Stud Type, with Rubber Pad

IIG-EL

Inch Size, Steel "Glide-Rite"™ Industrial Glides, Fixed Threaded Stud Type, with Rubber Pad
MIG Metric Size, Steel &quot;Glide-Rite&quot;™ Industrial Glides, Fixed Threaded Stud Type, with Plastic Pad

MIG

Metric Size, Steel "Glide-Rite"™ Industrial Glides, Fixed Threaded Stud Type, with Plastic Pad
MIG-EL Metric Size, Steel &quot;Glide-Rite&quot;™ Industrial Glides, Fixed Threaded Stud Type, with Rubber Pad

MIG-EL

Metric Size, Steel "Glide-Rite"™ Industrial Glides, Fixed Threaded Stud Type, with Rubber Pad
DIN 6379 Steel Double Ended Threaded Studs, for T-Slot Nuts

DIN 6379

Steel Double Ended Threaded Studs, for T-Slot Nuts
GN 2240.1 Thermoplastic Polyurethane Coupling Spiders, for GN 2240 / GN 2241 Hardness: BS - 80 Shore A, blue GN 2240.1 Thermoplastic Polyurethane Coupling Spiders, for GN 2240 / GN 2241 Hardness: RS - 98 Shore A, red GN 2240.1 Thermoplastic Polyurethane Coupling Spiders, for GN 2240 / GN 2241 Hardness: WS - 92 Shore A, white

GN 2240.1

Thermoplastic Polyurethane Coupling Spiders, for GN 2240 / GN 2241
LS-GTH Steel Welded Construction Heavy Duty Extrathane® Treaded Swivel Casters, with Plate Mounting, Extra Strength Swivel Head Design Series Type: K-ST - Ball bearing with stop-top brake LS-GTH Steel Welded Construction Heavy Duty Extrathane® Treaded Swivel Casters, with Plate Mounting, Extra Strength Swivel Head Design Series Type: K - Ball bearing

LS-GTH

Steel Welded Construction Heavy Duty Extrathane® Treaded Swivel Casters, with Plate Mounting, Extra Strength Swivel Head Design Series
GN 900 Aluminum Adjustable Slide Units Identification no.: 2 - With adjustable lever<br />Type: H - With handwheel GN 900 Aluminum Adjustable Slide Units Identification no.: 1 - Without adjustable lever<br />Type: D - With control knob GN 900 Aluminum Adjustable Slide Units Identification no.: 1 - Without adjustable lever<br />Type: DR - With control knob and digital position indicator EN 954, type AR GN 900 Aluminum Adjustable Slide Units Identification no.: 1 - Without adjustable lever<br />Type: HN - With handwheel and digital position indicator EN 954, type AN GN 900 Aluminum Adjustable Slide Units Identification no.: 2 - With adjustable lever<br />Type: HR - With handwheel and digital position indicator EN 954, type AR GN 900 Aluminum Adjustable Slide Units Identification no.: 2 - With adjustable lever<br />Type: S - Without adjustable spindle and operating element

GN 900

Aluminum Adjustable Slide Units
EN 6473 Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves Type: K - Ball-shaped rollers<br />Identification no.: 1 - Single row EN 6473 Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves Type: K - Ball-shaped rollers<br />Identification no.: 2 - Double row EN 6473 Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves Type: Z - Cylindrical rollers<br />Identification no.: 1 - Single row EN 6473 Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves Type: Z - Cylindrical rollers<br />Identification no.: 2 - Double row EN 6473 Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves Type: ZA - Cylindrically offset rollers<br />Identification no.: 1 - Single row EN 6473 Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves Type: ZA - Cylindrically offset rollers<br />Identification no.: 2 - Double row

EN 6473

Plastic Side Guide Segments, Plastic Carrier Profile, Cylinder and Ball Rollers on One Side for Curves
GN 607.9 Steel Double Closed-End Wrench, for Short Indexing Plungers GN 607.2 / GN 607.3

GN 607.9

Steel Double Closed-End Wrench, for Short Indexing Plungers GN 607.2 / GN 607.3
EN 6475.4 Plastic Side Guide Clamps, with Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: T - Retaining profile trapezoidal EN 6475.4 Plastic Side Guide Clamps, with Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: R - Retaining profile round

EN 6475.4

Plastic Side Guide Clamps, with Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2
EN 6475.4 Plastic Side Guide Clamps, without Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: T - Retaining profile trapezoidal EN 6475.4 Plastic Side Guide Clamps, without Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: R - Retaining profile round

EN 6475.4

Plastic Side Guide Clamps, without Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2
EN 6475.5 Plastic Side Guide Clamps, with Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: T - Retaining profile trapezoidal EN 6475.5 Plastic Side Guide Clamps, with Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: R - Retaining profile round

EN 6475.5

Plastic Side Guide Clamps, with Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2
EN 6475.5 Plastic Side Guide Clamps, without Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: T - Retaining profile trapezoidal EN 6475.5 Plastic Side Guide Clamps, without Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2 Type: R - Retaining profile round

EN 6475.5

Plastic Side Guide Clamps, without Retaining Rod, for Side Guides EN 6475 / EN 6475.1 / EN 6475.2
GN 1426 Steel Telescopic Slides, with Double-Sided Full Extension, Load Capacity up to 310 lbf

GN 1426

Steel Telescopic Slides, with Double-Sided Full Extension, Load Capacity up to 310 lbf
NO. 6317 Steel Double-Ended Goose Neck Clamp

NO. 6317

Steel Double-Ended Goose Neck Clamp
AN 352 Tube Expander Fittings For 20 mm OD x 1.5 mm Wall Thickness Round Tubing

AN 352

Tube Expander Fittings For 20 mm OD x 1.5 mm Wall Thickness Round Tubing
AN 354 Tube Expander Fittings For 38 mm OD x 1.5 mm Wall Thickness Round Tubing

AN 354

Tube Expander Fittings For 38 mm OD x 1.5 mm Wall Thickness Round Tubing
GN 9192.3 Steel Height Adjusting Cylinders, for Down-Thrust Clamps GN 9192

GN 9192.3

Steel Height Adjusting Cylinders, for Down-Thrust Clamps GN 9192
SN 946 Steel Willi Glide Leveling Mounts, Fixed Threaded Stud Type, with Plastic / Rubber Pad Type: E - With rubber pad SN 946 Steel Willi Glide Leveling Mounts, Fixed Threaded Stud Type, with Plastic / Rubber Pad Type: N - With plastic pad

SN 946

Steel Willi Glide Leveling Mounts, Fixed Threaded Stud Type, with Plastic / Rubber Pad
GN 513 Steel Spring Loaded Positioning Elements Type: K - Pointed nose, steel GN 513 Steel Spring Loaded Positioning Elements Type: H - Semi-spherical, steel GN 513 Steel Spring Loaded Positioning Elements Type: I - Tapped type GN 513 Steel Spring Loaded Positioning Elements Type: P - Prism (120°)

GN 513

Steel Spring Loaded Positioning Elements
EN 6476.3 Plastic Side Guide Bracket, Swiveling EN 6476.3 Plastic Side Guide Bracket, Swiveling

EN 6476.3

Plastic Side Guide Bracket, Swiveling
EN 6476 Plastic Side Guide Bracket, Fixed, with Contact Edge EN 6476 Plastic Side Guide Bracket, Fixed, with Contact Edge

EN 6476

Plastic Side Guide Bracket, Fixed, with Contact Edge
EN 6476.2 Plastic Side Guide Bracket, Swiveling, with Contact Edge EN 6476.2 Plastic Side Guide Bracket, Swiveling, with Contact Edge

EN 6476.2

Plastic Side Guide Bracket, Swiveling, with Contact Edge
GN 610 Steel / Stainless Steel Spring Loaded Shells Type: H - Semi-spherical, steel GN 610 Steel / Stainless Steel Spring Loaded Shells Type: HBN - Semi-spherical with collar, stainless steel GN 610 Steel / Stainless Steel Spring Loaded Shells Type: HN - Semi-spherical, stainless steel GN 610 Steel / Stainless Steel Spring Loaded Shells Type: K - Pointed nose, steel

GN 610

Steel / Stainless Steel Spring Loaded Shells
EN 6475.3 Plastic Side Guide Clamps, with Opening for Flat Steel Bar Type: T - Retaining profile trapezoidal EN 6475.3 Plastic Side Guide Clamps, with Opening for Flat Steel Bar Type: R - Retaining profile round

EN 6475.3

Plastic Side Guide Clamps, with Opening for Flat Steel Bar
GN 2402 Steel Linear Slides, with No Extension

GN 2402

Steel Linear Slides, with No Extension
GN 167 Aluminum Wide Base Plate Connector Clamps, Split Assembly Bildzuordnung: B - Bore<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 167 Aluminum Wide Base Plate Connector Clamps, Split Assembly Bildzuordnung: B - Bore<br />Finish: SW - Black, RAL 9005, textured finish GN 167 Aluminum Wide Base Plate Connector Clamps, Split Assembly Bildzuordnung: V - Square<br />Finish: BL - Plain finish, Matte shot-blasted finish GN 167 Aluminum Wide Base Plate Connector Clamps, Split Assembly Bildzuordnung: V - Square<br />Finish: SW - Black, RAL 9005, textured finish

GN 167

Aluminum Wide Base Plate Connector Clamps, Split Assembly
GN 271.4 Aluminum Sensor Holders Finish: SW - Black, RAL 9005, textured finish

GN 271.4

Aluminum Sensor Holders
GN 272.4 Aluminum, Sensor Holders

GN 272.4

Aluminum, Sensor Holders
GN 273.4 Aluminum Sensor Holders

GN 273.4

Aluminum Sensor Holders
GN 274.4 Aluminum Sensor Holders

GN 274.4

Aluminum Sensor Holders
GN 275.4 Aluminum Sensor Holders

GN 275.4

Aluminum Sensor Holders
GN 276.4 Aluminum Sensor Holders

GN 276.4

Aluminum Sensor Holders
GN 277.4 Aluminum Sensor Holders

GN 277.4

Aluminum Sensor Holders
GN 278.4 Aluminum Sensor Holders

GN 278.4

Aluminum Sensor Holders
EN 6471.2 Plastic End Caps, for One-Sided Side Guides EN 6471

EN 6471.2

Plastic End Caps, for One-Sided Side Guides EN 6471
EN 6472.2 Plastic End Caps, for Two-Sided Side Guides EN 6472

EN 6472.2

Plastic End Caps, for Two-Sided Side Guides EN 6472
WN 7379 Inch Size, Steel Socket Shoulder Screws, with Collar

WN 7379

Inch Size, Steel Socket Shoulder Screws, with Collar
ISO 7379 Metric Size, Steel Shoulder Screws, with Collar

ISO 7379

Metric Size, Steel Shoulder Screws, with Collar
GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor Type: V - For vertical acting toggle clamp<br />Identification no.: 1 - With proximity sensor GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor Type: H - For horizontal acting toggle clamp<br />Identification no.: 1 - With proximity sensor GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor Type: H - For horizontal acting toggle clamp<br />Identification no.: 2 - Without proximity sensor GN 801.3 Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor Type: V - For vertical acting toggle clamp<br />Identification no.: 2 - Without proximity sensor

NEW GN 801.3

Stainless Steel Sensor holder, for Toggle Clamp with Horizontal Base, with / without Sensor
GN 810.17 Steel Clamping Arm Extenders, for Knee Lever Modules GN 810.12 / GN 810.13

GN 810.17

Steel Clamping Arm Extenders, for Knee Lever Modules GN 810.12 / GN 810.13
AN 817 Stainless Steel Roller Guides, 70 mm Width

AN 817

Stainless Steel Roller Guides, 70 mm Width
AN 821 Stainless Steel Roller Guides, 120 mm Width

AN 821

Stainless Steel Roller Guides, 120 mm Width
GN 1400 Steel Telescopic Slides, with Partial Extension, Load Capacity up to 62 lbf

GN 1400

Steel Telescopic Slides, with Partial Extension, Load Capacity up to 62 lbf
GN 1404 Steel Telescopic Slides, with Partial Extension, Load Capacity up to 175 lbf

GN 1404

Steel Telescopic Slides, with Partial Extension, Load Capacity up to 175 lbf
GN 1408 Steel Telescopic Slides, with Full Extension, Load Capacity up to 56 lbf

GN 1408

Steel Telescopic Slides, with Full Extension, Load Capacity up to 56 lbf
GN 1410 Steel Telescopic Slides, with Full Extension, Load Capacity up to 115 lbf

GN 1410

Steel Telescopic Slides, with Full Extension, Load Capacity up to 115 lbf
GN 1420 Steel Telescopic Slides, with Full Extension, Load Capacity up to 290 lbf

GN 1420

Steel Telescopic Slides, with Full Extension, Load Capacity up to 290 lbf
GN 1430 Steel Telescopic Slides, with Full Extension, Load Capacity up to 477 lbf

GN 1430

Steel Telescopic Slides, with Full Extension, Load Capacity up to 477 lbf
GN 1440 Steel Telescopic Slides, with Full Extension, Load Capacity up to 731 lbf Type: B - With rubber stop GN 1440 Steel Telescopic Slides, with Full Extension, Load Capacity up to 731 lbf Type: K - With rubber stop, latch in extended position GN 1440 Steel Telescopic Slides, with Full Extension, Load Capacity up to 731 lbf Type: M - With rubber stop, latch in retracted position GN 1440 Steel Telescopic Slides, with Full Extension, Load Capacity up to 731 lbf Type: Q - With rubber stop, latch in extended and retracted position

GN 1440

Steel Telescopic Slides, with Full Extension, Load Capacity up to 731 lbf
ISO 7379 Metric Size, Stainless Steel Socket Shoulder Screws, with Collar

ISO 7379

Metric Size, Stainless Steel Socket Shoulder Screws, with Collar
GN 1414 Steel Telescopic Slides, with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 80 lbf

GN 1414

Steel Telescopic Slides, with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 80 lbf
GN 1422 Steel Telescopic Slides, with Full Extension and Self-Retracting Mechanism, Load Capacity up to 290 lbf

GN 1422

Steel Telescopic Slides, with Full Extension and Self-Retracting Mechanism, Load Capacity up to 290 lbf
GN 1412 Steel Telescopic Slides, with Full Extension and Self-Retracting Mechanism, Load Capacity up to 96 lbf

GN 1412

Steel Telescopic Slides, with Full Extension and Self-Retracting Mechanism, Load Capacity up to 96 lbf
GN 1418 Steel Telescopic Slides, with Full Extension and Push to Open Mechanism, Load Capacity up to 96 lbf

GN 1418

Steel Telescopic Slides, with Full Extension and Push to Open Mechanism, Load Capacity up to 96 lbf
GN 1424 Steel Telescopic Slides, with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 169 lbf

GN 1424

Steel Telescopic Slides, with Full Extension and Dampened Self-Retracting Mechanism, Load Capacity up to 169 lbf
GN 1432 Steel Telescopic Slides, with Full Extension and Self-Retracting Mechanism, Load Capacity up to 517 lbf

GN 1432

Steel Telescopic Slides, with Full Extension and Self-Retracting Mechanism, Load Capacity up to 517 lbf
GN 1450 Stainless Steel Telescopic Slides, with Full Extension, Load Capacity up to 108 lbf

GN 1450

Stainless Steel Telescopic Slides, with Full Extension, Load Capacity up to 108 lbf
GN 801.4 Stainless Steel Sensor Holders, for Toggle Clamp with Vertical Base, with / without Sensor Type: V - For vertical acting toggle clamp<br />Identification no.: 1 - With proximity sensor GN 801.4 Stainless Steel Sensor Holders, for Toggle Clamp with Vertical Base, with / without Sensor Type: H - For horizontal acting toggle clamp<br />Identification no.: 1 - With proximity sensor GN 801.4 Stainless Steel Sensor Holders, for Toggle Clamp with Vertical Base, with / without Sensor Type: H - For horizontal acting toggle clamp<br />Identification no.: 2 - Without proximity sensor GN 801.4 Stainless Steel Sensor Holders, for Toggle Clamp with Vertical Base, with / without Sensor Type: V - For vertical acting toggle clamp<br />Identification no.: 2 - Without proximity sensor

NEW GN 801.4

Stainless Steel Sensor Holders, for Toggle Clamp with Vertical Base, with / without Sensor
GN 801.1 Steel Clamping Arm Extenders, Rigid, for Toggle Clamps with U-Bar

GN 801.1

Steel Clamping Arm Extenders, Rigid, for Toggle Clamps with U-Bar
GN 801.2 Steel Clamping Arm Extenders, with Pivot Joint, for Toggle Clamps with U-Bar

GN 801.2

Steel Clamping Arm Extenders, with Pivot Joint, for Toggle Clamps with U-Bar
GN 809.1 Steel Clamping Arm Extenders, for Toggle Clamps with Solid Clamping Arm

GN 809.1

Steel Clamping Arm Extenders, for Toggle Clamps with Solid Clamping Arm
DIN 6332 Blackened Steel Grub Screws, with Hardened or Unhardened Tip

DIN 6332

Blackened Steel Grub Screws, with Hardened or Unhardened Tip
DIN 9845 Steel Guide Bushings, Punch Guide Bushings

NEW DIN 9845

Steel Guide Bushings, Punch Guide Bushings
GN 753 Plastic Guide Rollers Type: KF - Wedge-shaped<br />Identification no.: 2 - Stud with external thread GN 753 Plastic Guide Rollers Type: KF - Wedge-shaped<br />Identification no.: 1 - With bore GN 753 Plastic Guide Rollers Type: KR - Circular (O-ring)<br />Identification no.: 1 - With bore GN 753 Plastic Guide Rollers Type: KR - Circular (O-ring)<br />Identification no.: 2 - Stud with external thread GN 753 Plastic Guide Rollers Type: KV - Convex<br />Identification no.: 1 - With bore GN 753 Plastic Guide Rollers Type: KV - Convex<br />Identification no.: 2 - Stud with external thread GN 753 Plastic Guide Rollers Type: ZL - Cylindrical<br />Identification no.: 1 - With bore

GN 753

Plastic Guide Rollers
NO.508L Steel Extended T-Slot Nuts

NO.508L

Steel Extended T-Slot Nuts
GN 338 Steel Disks with Cover Cap, for use as Device Bases / Glides / Screw Covers Type: KS - With cover cap, gliding GN 338 Steel Disks with Cover Cap, for use as Device Bases / Glides / Screw Covers Type: KR - With cover cap, non-slip

GN 338

Steel Disks with Cover Cap, for use as Device Bases / Glides / Screw Covers
GN 753.1 Plastic Guide Rollers, with Ball Bearing Type: KV - Convex<br />Identification no.: 1 - With bore GN 753.1 Plastic Guide Rollers, with Ball Bearing Type: KV - Convex<br />Identification no.: 2 - Stud with external thread GN 753.1 Plastic Guide Rollers, with Ball Bearing Type: KV - Convex<br />Identification no.: 3 - Stud with internal thread GN 753.1 Plastic Guide Rollers, with Ball Bearing Type: ZL - Cylindrical<br />Identification no.: 1 - With bore GN 753.1 Plastic Guide Rollers, with Ball Bearing Type: ZL - Cylindrical<br />Identification no.: 2 - Stud with external thread GN 753.1 Plastic Guide Rollers, with Ball Bearing Type: ZL - Cylindrical<br />Identification no.: 3 - Stud with internal thread

GN 753.1

Plastic Guide Rollers, with Ball Bearing
GN 2404 Steel Telescopic Linear Slides, with Partial Extension

GN 2404

Steel Telescopic Linear Slides, with Partial Extension
GN 2406 Steel Telescopic Linear Slides, with Full Extension, with S-Shaped Intermediate Profile

GN 2406

Steel Telescopic Linear Slides, with Full Extension, with S-Shaped Intermediate Profile
GN 2408 Steel Telescopic Linear Slides, with Full Extension, with Rails Connected in H-Shape Type: DG - Runner with 1 countersunk hole and 1 thread GN 2408 Steel Telescopic Linear Slides, with Full Extension, with Rails Connected in H-Shape Type: DD - Runner with countersunk hole on both sides GN 2408 Steel Telescopic Linear Slides, with Full Extension, with Rails Connected in H-Shape Type: GG - Runner with thread on both sides

GN 2408

Steel Telescopic Linear Slides, with Full Extension, with Rails Connected in H-Shape
GN 2410 Steel Telescopic Linear Slides, with Full Extension, with Runners Connected in Dual Configuration

GN 2410

Steel Telescopic Linear Slides, with Full Extension, with Runners Connected in Dual Configuration
AN 505 Single Clamps with Rod for Conical Side Guide Rails

AN 505

Single Clamps with Rod for Conical Side Guide Rails
AN 500 Single Clamps for Conical Side Guide Rails

AN 500

Single Clamps for Conical Side Guide Rails
LER-PATH Steel Swivel Polyurethane Treaded Casters, with bolt hole fitting Type: K-FI-FK - Ball bearing with stop-fix brake, with thread guard LER-PATH Steel Swivel Polyurethane Treaded Casters, with bolt hole fitting Type: K - Ball bearing LER-PATH Steel Swivel Polyurethane Treaded Casters, with bolt hole fitting Type: K-FI - Ball bearing with stop-fix brake LER-PATH Steel Swivel Polyurethane Treaded Casters, with bolt hole fitting Type: K-FK - Ball bearing with thread guard

LER-PATH

Steel Swivel Polyurethane Treaded Casters, with bolt hole fitting
GN 618 Steel Indexing Plungers, Non Lock-Out, Unthreaded Weldable Body Type: A - With knob GN 618 Steel Indexing Plungers, Non Lock-Out, Unthreaded Weldable Body Type: G - With threaded stem

GN 618

Steel Indexing Plungers, Non Lock-Out, Unthreaded Weldable Body
GN 816 Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position Type: ARK - Operation with knob, red sleeve, with lock nut GN 816 Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position Type: A - Operation with knob, black sleeve, without lock nut GN 816 Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position Type: AK - Operation with knob, black sleeve, with lock nut GN 816 Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position Type: AR - Operation with knob, red sleeve, without lock nut GN 816 Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position Type: B - Operation with key, black sleeve, without lock nut GN 816 Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position Type: BK - Operation with key, black sleeve, with lock nut

GN 816

Steel Locking Indexing Plungers, Plunger Pin Protruded in Normal Position
GN 437.3 Zinc Die-Cast Hinges, with Spring-Loaded Return Type: R2 - Spring-loaded return, opening, medium spring force<br />Color: SR - Silver, RAL 9006, textured finish GN 437.3 Zinc Die-Cast Hinges, with Spring-Loaded Return Type: L2 - Spring-loaded return, closing, medium spring force<br />Color: SR - Silver, RAL 9006, textured finish GN 437.3 Zinc Die-Cast Hinges, with Spring-Loaded Return Type: L2 - Spring-loaded return, closing, medium spring force<br />Color: SW - Black, RAL 9005, textured finish GN 437.3 Zinc Die-Cast Hinges, with Spring-Loaded Return Type: R2 - Spring-loaded return, opening, medium spring force<br />Color: SW - Black, RAL 9005, textured finish

GN 437.3

Zinc Die-Cast Hinges, with Spring-Loaded Return
EN 233.3 Technopolymer Plastic Hinges, with Spring-Loaded Return

EN 233.3

Technopolymer Plastic Hinges, with Spring-Loaded Return
GN 2422 Steel Cam Roller Linear Guide Rails, for Cam Roller Linear Guide Rail Systems, C-Profile Type: UT - Floating bearing rail, with mounting hole for flat head screw GN 2422 Steel Cam Roller Linear Guide Rails, for Cam Roller Linear Guide Rail Systems, C-Profile Type: UV - Floating bearing rail, with mounting hole for countersunk screw GN 2422 Steel Cam Roller Linear Guide Rails, for Cam Roller Linear Guide Rail Systems, C-Profile Type: XT - Fixed bearing rail, with mounting hole for flat head screw GN 2422 Steel Cam Roller Linear Guide Rails, for Cam Roller Linear Guide Rail Systems, C-Profile Type: XV - Fixed bearing rail, with mounting hole for countersunk screw

GN 2422

Steel Cam Roller Linear Guide Rails, for Cam Roller Linear Guide Rail Systems, C-Profile
GN 9190.1 Steel Side Clamps, with Clamping Thread Type: E - With serrated clamping jaw<br />Coding: G - Clamping stroke with ball point screw GN 9190.1 Steel Side Clamps, with Clamping Thread Type: E - With serrated clamping jaw<br />Coding: K - Clamping stroke with adjustable lever GN 9190.1 Steel Side Clamps, with Clamping Thread Type: P - With detent clamping jaw<br />Coding: G - Clamping stroke with ball point screw GN 9190.1 Steel Side Clamps, with Clamping Thread Type: P - With detent clamping jaw<br />Coding: K - Clamping stroke with adjustable lever

GN 9190.1

Steel Side Clamps, with Clamping Thread
GN 712 Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position Type: A - Non lock-out, without lock nut GN 712 Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position Type: AK - Non lock-out, with lock nut GN 712 Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position Type: R - Lock-out, without lock nut GN 712 Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position Type: RK - Lock-out, with lock nut GN 712 Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position Type: S - With safety lock-out, without lock nut GN 712 Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position Type: SK - With safety lock-out, with lock nut

GN 712

Steel Cam Action Indexing Plungers, Plunger Pin Protruded in Normal Position
GN 9190 Steel Side Clamps, with Eccentrical Cam Lever Type: E - With serrated clamping jaw<br />Coding: L - Clamping by counter-clockwise rotation GN 9190 Steel Side Clamps, with Eccentrical Cam Lever Type: E - With serrated clamping jaw<br />Coding: R - Clamping by clockwise rotation GN 9190 Steel Side Clamps, with Eccentrical Cam Lever Type: P - With detent clamping jaw<br />Coding: L - Clamping by counter-clockwise rotation GN 9190 Steel Side Clamps, with Eccentrical Cam Lever Type: P - With detent clamping jaw<br />Coding: R - Clamping by clockwise rotation

GN 9190

Steel Side Clamps, with Eccentrical Cam Lever
GN 9190.2 Steel Side Clamps, with Clamping Thread and Support Type: E - With serrated clamping jaw<br />Coding: G - Clamping stroke with ball point screw GN 9190.2 Steel Side Clamps, with Clamping Thread and Support Type: E - With serrated clamping jaw<br />Coding: K - Clamping stroke with adjustable lever GN 9190.2 Steel Side Clamps, with Clamping Thread and Support Type: P - With detent clamping jaw<br />Coding: G - Clamping stroke with ball point screw GN 9190.2 Steel Side Clamps, with Clamping Thread and Support Type: P - With detent clamping jaw<br />Coding: K - Clamping stroke with adjustable lever

GN 9190.2

Steel Side Clamps, with Clamping Thread and Support
EN 745.2 Plastic Threaded Plugs, with O-Ring Identification no.: 1 - Without vent hole EN 745.2 Plastic Threaded Plugs, with O-Ring Identification no.: 2 - With vent hole

EN 745.2

Plastic Threaded Plugs, with O-Ring
GN 749 Steel Threaded Plugs Type: A - NBR rubber seal (Perbunan<sup>®</sup>) GN 749 Steel Threaded Plugs Type: B - FPM rubber seal (Viton<sup>®</sup>)

GN 749

Steel Threaded Plugs
EN 746 Plastic Threaded Plugs

EN 746

Plastic Threaded Plugs
GN 187.1 Steel Guide Housings, for GN 187.4 Serrated Locking Plates Material: ST - Steel

GN 187.1

Steel Guide Housings, for GN 187.4 Serrated Locking Plates
EN 118.1 Brass Guide Bushing, for Door Cam Latches EN 118

EN 118.1

Brass Guide Bushing, for Door Cam Latches EN 118
HRLK-ALTH Steel Heavy Duty Extrathane® Treaded Leveling Caster, with Swivel Head, with Plate Mounting

HRLK-ALTH

Steel Heavy Duty Extrathane® Treaded Leveling Caster, with Swivel Head, with Plate Mounting
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

+1-800-397-6993 sales@jwwinco.ca
Request Callback
 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
J.W. Winco, Inc.
Go to
www.jwwinco.com
An error has occurred!
We have received your callback request and will contact you soon.