Because of a web page matching your requested link is no longer valid. You have been automatically redirected to the new link.

GN 75.6 Mushroom Shaped Knobs Stainless Steel, with Tapped Hole or Threaded Stud, Hygienic Design

Photo

GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: D - With tapped hole
Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR
Type: D - With tapped hole
Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR
GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: D - With tapped hole
Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: D - With tapped hole
Finish: MT - Matte finish (Ra < 0.8 µm)
Sealing ring material: E - EPDM GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: D - With tapped hole
Finish: MT - Matte finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: D - With tapped hole
Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: E - EPDM GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: E - With threaded stud
Finish: MT - Matte finish (Ra < 0.8 µm)
Sealing ring material: E - EPDM GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: E - With threaded stud
Finish: MT - Matte finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: E - With threaded stud
Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: E - EPDM GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design Type: E - With threaded stud
Finish: PL - Polished finish (Ra < 0.8 µm)
Sealing ring material: H - H-NBR
Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products
Hygienic-Design

Product Family Hygienic Design

Standard Parts of the “Hygienic Design” product family are labeled with the HD icon. They combine high surface quality, freedom from dead spaces, non-scooped outer surfaces, and sealed bolting areas. A sealing concept based on FEM calculations ensures reliable contact pressure after installation.

  • suitable for use in hygienically sensitive areas
  • quick and easy cleaning
  • no dead spaces due to functional seals
  • certified according to EHEDG guidelines
Show all Hygienic Design products
FDA

FDA compliant

Product description

Information

Mushroom shaped knobs GN 75.6 are intended for use in hygienic areas. The sealed mounting surface enables fastening without dead spaces. The impervious geometry in combination with the high quality finish prevents the accumulation of dirt and facilitates cleaning.

Mushroom shaped knobs GN 75.6 have a compact and timeless design.

Specification

Knob
Stainless steel AISI 316L

  • Matte finish (Ra < 0.8 µm)MT
  • Polished finish (Ra < 0.8 µm)PL

Sealing ring

  • H-NBRH
    Operating temperature
    -13 °F to +302 °F (-25 °C to +150 °C)
  • EPDME
    Operating temperature
    -40 °F to +248 °F (-40 °C to +120 °C)
  • FDA compliant material
  • Blue
  • Hardness 85±5 Shore A

RoHS

Accessory

Sealing Rings GN 7600

On request

  • with FKM sealing ring (Fluorine rubber) F

Technical drawing

3D
Hide technical drawing
GN 75.6 Stainless Steel Mushroom Shaped Knobs, with Tapped Hole or Threaded Stud, Hygienic Design sketch

Part Options / Table

Type

DWith tapped hole
EWith threaded stud
Show / Hide columns

Metric

Dimensions in: Inch (change to Metric)
d1d2
Type D
d3
Type E
d4d5hLength lt
min.
0.79M 5M 50.550.580.940.390.28
0.98M 6M 60.630.661.140.470.35
1.26M 8M 80.710.741.460.550.47

Build & Price

3D Product Configurator
Handle diameter d1
Tapped hole d2
Threaded stud d3
Type


Finish
Sealing ring material


Selected Part

Total Canadian Dollars (net)
Can$34.81
Call / Email for Delivery Time
Please note our quantity discounts (Canadian Dollars).
MinMaxPrice
124Can$34.81
2549Can$31.91
5099Can$29.01
≥ 100Can$26.11
Prop 65: Not compliant
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
RoHS: Compliant
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Weight: 0.055 lbs
If weight is not listed, please contact our Sales Department for additional information regarding weight.
Phone: 1-800-397-6993
All Prices are in Canadian Dollars. Taxes Not Included.

CAD Download

Other Data Formats

Email CAD File

To receive an email with a CAD download without creating an account, please enter your e-mail address. Max of 3 CAD files per day unless you create an account.

Please enter the code above.

CAD Download Tutorial About CAD Downloads
Save as Favorites

Please enter the code above.

Need Help?

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Eastern Time: 800-397-6993

Special Requests | Contact our sales team

GN 75.6-20-M5-D-MT-HGN 75.6-20-M5-D-PL-HGN 75.6-20-M5-D-MT-EGN 75.6-20-M5-D-PL-EGN 75.6-20-M5-E-MT-HGN 75.6-20-M5-E-PL-HGN 75.6-20-M5-E-MT-EGN 75.6-20-M5-E-PL-EGN 75.6-25-M6-D-MT-HGN 75.6-25-M6-D-PL-HGN 75.6-25-M6-D-MT-EGN 75.6-25-M6-D-PL-EGN 75.6-25-M6-E-MT-HGN 75.6-25-M6-E-PL-HGN 75.6-25-M6-E-MT-EGN 75.6-25-M6-E-PL-EGN 75.6-32-M8-D-MT-HGN 75.6-32-M8-D-PL-HGN 75.6-32-M8-D-MT-EGN 75.6-32-M8-D-PL-EGN 75.6-32-M8-E-MT-HGN 75.6-32-M8-E-PL-HGN 75.6-32-M8-E-MT-EGN 75.6-32-M8-E-PL-E

This could also be interesting...

Recently Viewed

Show all standards
Your Contact

You are looking for a Winco partner near you? Please select the country.

JW Winco Services

Our service team is available from Monday to Friday between 8:00 AM and 5:30 PM Central Time

Request Callback
 
Our customers in the US are served by our local branch office.
 
J.W. Winco, Inc.
An error has occurred!
We have received your callback request and will contact you soon.